Abstract
A new method of adlay shelling was presented to design a sheller. The adlay shelling technology that a mutual friction between grinding wheel and nylon wheels horizontally placed shell adlay was used. Moreover, the three-dimensional structure of sheller was designed, and the main parts of machine were also checked. Furthermore, in order to prevent the occurrence of resonance, ANSYS modal analysis of the body and the frame were carried out. The prototype of Adlay shell test results showed that the raw material processing capacity was 0.3 t/h, the shelling rate was greater than 95%, the whole kernel rate was more than 98%, and the power of the test equipment was 3 kW, respectively. As a result, the adlay shelling machine designed in this study might meet the needs of most processing enterprises.
Publication Date
8-28-2016
First Page
75
Last Page
78
DOI
10.13652/j.issn.1003-5788.2016.08.018
Recommended Citation
Zhigang, HU; Yonglin, ZHANG; Chuanliang, HOU; and Jun, LIU
(2016)
"The design and finite element analysis of the Adlay grindingplate sheller,"
Food and Machinery: Vol. 32:
Iss.
8, Article 18.
DOI: 10.13652/j.issn.1003-5788.2016.08.018
Available at:
https://www.ifoodmm.cn/journal/vol32/iss8/18
References
[1] 杨正志, 汤进. 一种薏仁米加工方法: 中国, CN103621874A[P]. 2014-03-12.
[2] 谢孝红. 薏仁米加工技术的优化与应用[J]. 粮食与食品工业, 2013, 20(5): 27-29.
[3] 倪卫英, 钮向民. 豆类去皮机: 中国, CN103005622A[P]. 2013-04-03.
[4] 张日红, 朱立学. 水平碾搓式银杏脱壳机脱壳过程仿真研究[J]. 食品与机械, 2011, 27(3): 101-103.
[5] 刘平, 肖诗明, 巩发永, 等. 新型碾搓式葵花籽脱壳机[J]. 食品与机械, 2010, 26(3): 100-101.
[6] NKAKINI S O, AYOTAMUNO M J, MAEBA G P D, et al. Manually-powered continuous-flow maize-sheller[J]. Applied Energy, 2007, 84(12): 1 175-1 186.
[7] 朱德泉, 曹成茂, 方家文, 等. 6HS-6 型山核桃破壳机的实验研究[J]. 食品工业科技,2010, 31(11): 304-306.
[8] 阮竞兰, 向光波, 程相法. 胶辊砻谷机性能参数试验与优化[J]. 农业工程学报, 2011, 27(5): 353-357.
[9] 陆华忠, 李君, 吕恩利, 等. 一种盘式剑豆脱壳机: 中国, 201210005901.0[P]. 2012-07-04.
[10] 杨正志, 杨延宏. 一种薏仁米生产加工工艺及装置: 中国, CN103894257A[P]. 2014-07-02.
[11] 邱健, 詹友基, 贾敏忠. 陶瓷结合剂金刚石砂轮磨削超细晶粒硬质合金的表面粗糙度研究[J]. 工具技术, 2014, 48(9): 20-24.
[12] 周怒潮, 贺小华, 李映峰. 搅拌釜凸缘结构的模态分析及改进设计[J]. 食品与机械, 2013, 29(2): 133-136.