Research and application of flexible feeding and discharging technology for storage tank
Objective: To solve the problems of low whole rate of the tobacco shredded from the cabinet, high rate of broken shreds and high concentration of regional dust. Methods: A flexible feeding and discharging system of the wire storage cabinet was designed, which effectively reduced the shredded tobacco and the regional dust concentration through the automatic telescopic sliding plate and the sliding and lifting raking roller. Results: After adopting the flexible feeding and discharging system of the wire storage cabinet, the change rate of the whole wire rate increased by 1.1%, from 80.2% to 81.1%, and the broken wire rate decreased to 2.2%; The regional dust concentration C-TWA decreased to 0.5 mg/m3. Conclusion: The improved wire storage cabinet achieves the purpose of cleaner production, cost reduction and efficiency enhancement.
Wei-zhong, ZENG; Qiang, LI; Jun, LI; Jin-peng, ZOU; Tian, LIU; Chang, LIU; Xing-quan, ZHANG; and Jia-xi, LI
"Research and application of flexible feeding and discharging technology for storage tank,"
Food and Machinery: Vol. 38:
9, Article 22.
Available at: https://www.ifoodmm.cn/journal/vol38/iss9/22
 郑玉忠,侯加文.储丝柜出料烟丝整丝率降低原因及改进措施[J].中国高新技术企业,2016(3):35-36.ZHENG Y Z,HOU J W.Reasons and improvement measures for reduction of long strand proportion in cut tobacco discharged from silo[J].China High-Tech Enterprises,2016(2):35-36.
 许旭.贮丝柜自动翻板装置的研究与应用[J].科技创新导报,2018,15(2):89-90.XU X.Research and application of automatic flap for cut tobacco silo[J].Science and Technology Innovation Herald,2018,15(2):89-90.
 吴长庆.一种新型伸缩拨叉拨料装置[J].山西冶金,2014,37(2):86-88.WU C Q.R & D of telescopic kick-off for steel tube[J].Shanxi Metallurgy,2014,37(2):86-88.
 侯加文,丁瑞.减少贮丝柜出柜烟丝整丝率降低值几种方案分析[J].科技传播,2013,5(9):80,76.HOU J W,DING R.Analysis of several solutions for decreasing reduction of long strand proportion in cut tobacco discharged from silo[J].Science and Technology Communication,2013,5(9):80,76.
 董耀.耙齿定向拨丝轮的设计及在贮丝柜出料处的应用[J].中国科技纵横,2013(11):119.DONG Y.Design of flapper with oriented spikers and its application to discharging silo[J].China Science and Technology Panorama Magazine,2013(11):119.
 李艳芳.贮柜柔性仿生拨丝辊的设计[J].中国机械,2019(12):2.LI Y F.Design of flexible bionic wire pulling roller for storage cabinet[J].Machine China,2019(12):2.
 李鹏超,吴国忠,邵文池,等.储柜出料系统的优化设计[J].烟草科技,2022,55(2):108-112.LI P C,WU G Z,SHAO W C,et al.Optimization of tobacco silo discharge system[J].Tobacco Science & Technology,2022,55(2):108-112.
 武占云,杨彬,周玉生,等.贮柜耙料机构的设计[J].烟草科技,2019,52(10):99-103.WU Z Y,YANG B,ZHOU Y S,et al.Design of raking mechanism for cut tobacco silo[J].Tobacco Science & Technology,2019,52(10):99-103.
 刘亦坚,陈占民,任谦,等.卷烟供丝系统的优化设计[J].烟草科技,2017,50(7):100-104.LIU Y J,CHEN Z M,REN Q,et al.Optimized design of cut tobacco feeding system for cigarette makers[J].Tobacco Science & Technology,2017,50(7):100-104.
 雷建生.贮丝柜出料控制系统的改进[J].农村科学实验,2018(4):85.LEI J S.Improvement of discharge control system of wire storage cabinet[J].Scientific Experimentin Countryside,2018(4):85.