Effect of double-bin plansifter motion parameters on sieving efficiency

LI Shuang, College of Food Science and Engineering , Henan University of Technology , Zhengzhou , Henan 450001 , China
WANG Fengcheng, College of Food Science and Engineering , Henan University of Technology , Zhengzhou , Henan 450001 , ChinaFollow
DENG Xiangzhi, College of Food Science and Engineering , Henan University of Technology , Zhengzhou , Henan 450001 , China
LI Xinze, College of Food Science and Engineering , Henan University of Technology , Zhengzhou , Henan 450001 , China
ZHANG Baowei, Hebei Pingle Flour Machinery Group , Shijiazhuang , Hebei 050800 , China
FU Yunfeng, Hebei Pingle Flour Machinery Group , Shijiazhuang , Hebei 050800 , China
XUE Chunzhi, Shandong Luyan Agricultural Co ., Ltd., Jinan , Shandong 250100 , China

Corresponding Author(s)

王凤成（1963—），男，河南工业大学教授，博士。E-mail：wangxiaoling74@163.com

Abstract

[Objective] The aim is to explore the effect of double-bin plansifter motion parameters on the material sieving efficiency of different systems after wheat milling. [Methods] The milled materials produced by the break system, tailing roll, and scratch system, obtained from a typical milling production line, were selected as raw materials. The double-bin plansifter was used to sieve different materials to investigate the variations in residence time inside the sieve body and in sieving performance under different motion parameters of milled materials in each system. The motion parameters with the optimal sieving performance for the milled materials from each system were then identified. [Results] The residence time of materials in the double-bin plansifter decreases in the order of the reduction system, scratch system, and break system. The sieving performance of the milled materials of the break system and scratch system increases and then decreases with the increase of centrifugal acceleration, and the sieving performance of the break system materials is the best in the combination of D = 64 mm and n = 190 r/min, while that of the scratch system materials is the best in the combination of D = 64 mm and n = 203 r/min. The sieving performance of the milled materials of the reduction system is proportional to the centrifugal acceleration in the range of 12.66 m/s² ≤ ω²r ≤ 20.71 m/s², and the best is achieved at D = 50 mm and n = 275 r/min. The parameter combination of large diameter and small rotational speed is suitable for break and scratch system materials, while the combination of small diameter and large rotational speed is more suitable for reduction system materials. [Conclusion] To achieve the best performance when sieving, appropriate motion parameters should be selected according to the characteristics of the materials.

Publication Date

7-13-2026

First Page

Last Page

DOI

10.13652/j.spjx.1003.5788.2025.80346

Recommended Citation

Shuang, LI; Fengcheng, WANG; Xiangzhi, DENG; Xinze, LI; Baowei, ZHANG; Yunfeng, FU; and Chunzhi, XUE (2026) "Effect of double-bin plansifter motion parameters on sieving efficiency," Food and Machinery: Vol. 42: Iss. 6, Article 11.
DOI: 10.13652/j.spjx.1003.5788.2025.80346
Available at: https://www.ifoodmm.cn/journal/vol42/iss6/11

References

[1] 马思雨,王晓曦,田潇凌,等.制粉对小麦粉营养品质影响机理研究现状 [J].中国粮油学报,2023,38(2):187-194.MA S Y,WANG X X,TIAN X L,et al.Research status of influence mechanism of milling on nutritional quality of wheat flour [J].Journal of the Chinese Cereals and Oils Association,2023,38(2):187-194.
[2] TIAN X L,WANG X X,WANG Z,et al.Particle size distribution control during wheat milling:nutritional quality and functional basis of flour products:a comprehensive review [J].International Journal of Food Science and Technology,2022,57(12):7 556-7 572.
[3] DEVAUX M F,LE DESCHAULT DE MONREDON F,GUIBERT D,et al.Particle size distribution of break,sizing and middling wheat flours by laser diffraction [J].Journal of the Science of Food and Agriculture,1998,78(2):237-244.
[4] HUANG Y L,GOH R M V,PUA A,et al.Effect of three milling processes (cyclone-,bead- and stone-millings ) on the quality of matcha:physical properties,taste and aroma [J].Food Chemistry,2022,372:131202.
[5] 顾尧臣.粮食加工设备工作原理、设计和应用 [M].武汉:湖北科学技术出版社,1998:356-402.GU Y C.Working principle,design and application of grain processing equipment [M].Wuhan:Hubei Science & Technology Press,1998:356-402.
[6] 周永利,毛君,谢苗,等.弛张筛筛分效率与筛面磨损的匹配优化研究 [J].煤炭科学技术,2023,51(11):202-213.ZHOU Y L,MAO J,XIE M,et al.Study on matching optimization of screening efficiency and screen surface wear of flip screen [J].Coal Science and Technology,2023,51(11):202-213.
[7] 顾尧臣.振动设备工作原理和应用 (二) [J].粮食与饲料工业,1995 (9):1-8.GU Y C.The working principle and application of horizontal rotary equipment (2) [J].Cereal & Feed Industry,1995 (9):1-8.
[8] 陈志成.制粉师工程手册 [M].北京:中国轻工业出版社,2007:157-179.CHEN Z C.Handbook of milling division engineering [M].Beijing:China Light Industry Press,2007:157-179.
[9] 梁彦兵,赵峰,陈小刚,等.高方平筛的发展历程 [J].粮食加工,2024,49(2):68-70.LIANG Y B,ZHAO F,CHEN X G,et al.The development of square plansifter [J].Grain Processing,2024,49(2):68-70.
[10] 邱明,廖振强,焦卫东,等.基于刚柔耦合的高方平筛动力学建模与振动模态分析 [J].中国机械工程,2008,19(24):2 960-2 964,2 990.QIU M,LIAO Z Q,JIAO W D,et al.Dynamics modeling and modal analysis of square plansifter based on rigid-flexible coupling [J].China Mechanical Engineering,2008,19(24):2 960-2 964,2 990.
[11] 张庆霞.高方平筛 A型筛格与 A-A筛路组合解析 [J].现代面粉工业,2022,36(5):7-12.ZHANG Q X.Analysis of the combination of A-type sieves and A:a sieve scheme of square plansifter [J].Modern Flour Milling Industry,2022,36(5):7-12.
[12] 王晓川,杨华瑞,马学东,等.复合振动筛筛分性能的离散元模拟研究 [J].应用力学学报,2025,42(4):821-827.WANG X C,YANG H R,MA X D,et al.Discrete element simulation study of composite vibrating screen screening performance [J].Chinese Journal of Applied Mechanics,2025,42(4):821-827.
[13] 苏栋,樊猛,王翔,等.非规则颗粒形态表征与离散元模拟方法研究 [J].中国科学:技术科学,2023,53(11):1 847-1 870.SU D,FAN M,WANG X,et al.Research on morphological characterization and discrete element modeling of irregular particles (in Chinese ) [J].Scientia Sinica (Technologica ),2023,53(11):1 847-1 870.
[14] 刘占斌,郭衍臣,张东升,等.基于离散元法的颗粒筛分行为模拟与仿真研究 [J].机械设计与研究,2025,41(1):305-310.LIU Z B,GUO Y C,ZHANG D S,et al.Simulation of particle screening behavior based on discrete element method [J].Machine Design & Research,2025,41(1):305-310.
[15] 任宁,王中营,白晓丽,等.基于离散元法的往复振动筛运动参数优化 [J].食品与机械,2023,39(2):63-67,80.REN N,WANG Z Y,BAI X L,et al.Motion parameter optimization of reciprocating vibrating screen based on discrete element method [J].Food & Machinery,2023,39(2):63-67,80.
[16] 田建珍.平筛筛理效率评价指标的探讨 [J].粮食与饲料工业,1995 (6):16-19.TIAN J Z.On the evaluation indexes for sifting efficiency of plansieve [J].Cereal & Feed Industry,1995 (6):16-19.
[17] 薛维华.平筛工作原理的多种解释 [J].现代面粉工业,2012,26(4):9-11.XUE W H.Multiple explanations of the working principle of flat sieve [J].Modern Flour Milling Industry,2012,26(4):9-11.
[18] 王希宁.平面回转筛惯性力及其平衡问题的探讨 [J].粮食与饲料工业,1989 (4):31-33.WANG X N.Discussion on the inertial force and its equilibrium of plane rotary screen [J].Cereal & Feed Industry,1989 (4):31-33.
[19] 梁彦兵,孙震,邵博,等.影响高方平筛筛理效果的因素 [J].粮食加工,2024,49(5):11-13.LIANG Y B,SUN Z,SHAO B,et al.Analysis of factors affecting the sieving effect of square plansifter [J].Grain Processing,2024,49(5):11-13.
[20] 陈亚哲,姚红良,刘刚.振动参数对筛分效率影响的实验研究[J].东北大学学报 (自然科学版 ),2019,40(8):1 122-1 126.CHEN Y Z,YAO H L,LIU G.Experimental study on influence of vibration parameters on screening efficiency [J].Journal of Northeastern University (Natural Science ),2019,40(8):1 122-1 126.
[21] 李少颖,刘远晓,王建立,等.粒度变化对小麦颗粒粉中淀粉理化性质与消化特性及多尺度结构的影响 [J].食品工业科技,2025,46(21):120-128.LI S Y,LIU S Y,WANG J L,et al.Effects of particle size on physicochemical properties,digestive characteristics,and multi-scale structures of starch in wheat granular flour [J].Science and Technology of Food Industry,2025,46(21):120-128.
[22] 唐海燕,石玉珠,王黎.新型双幅双频振动筛满足解耦条件方法 [J].中国矿业,1995 (2):69-73.TANG H Y,SHI Y Z,WANG L.A formula of the elminating coupling of vibrating screen with double amplitude and frequency [J].China Mining Magazine,1995,4(2):69-73.