Design of a pitting and slicing device for jujube

Authors

WEN Huaixing, Department of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xian, Shaanxi 710021, China
ZHOU Gaimei, Department of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xian, Shaanxi 710021, China
SHI Pengtao, Department of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xian, Shaanxi 710021, China

Abstract

A kind of pitting and slicing integrated device was designed. The material feeding was completed by material panel, hairbrush, slider-crank mechanism; The positioning clamp for jujube was accomplished by a flexible device connected with spring; The pitting can achieved by trough type cam mechanism and slider-crank mechanism; Use the Geneva mechanism to finish the intermittent feeding and intermittent rotating of pitting panel and slicing panel; The slicing was fulfilled by the fixed blade and rotated slicing panel. The results show that the device can meet the requirements of deep processing for jujube, its broken rate was lower than 5%.

Publication Date

10-28-2015

First Page

125

Last Page

128

DOI

10.13652/j.issn.1003-5788.2015.05.032

Recommended Citation

Huaixing, WEN; Gaimei, ZHOU; and Pengtao, SHI (2015) "Design of a pitting and slicing device for jujube," Food and Machinery: Vol. 31: Iss. 5, Article 32.
DOI: 10.13652/j.issn.1003-5788.2015.05.032
Available at: https://www.ifoodmm.cn/journal/vol31/iss5/32

References

[1] 朱江丽，田绪顺，李景彬，等.红枣自动分级技术的研究现状及展望［J］.安徽农业科学报,2011，39（36）：22 864~22 867.
[2] 彭三河.大枣去核装置的设计［J］.包装与食品机械,2005，23（4）：21~22 .
[3] 文怀兴，史鹏涛，王宁侠.一种大枣自动去核切片机：中国，201110312614.X［P］.2012—02—22.
[4] 张鹏霞，党凯锋，于北京.大枣自动切片机：中国，200920033989.0［P］.2010—08—25.
[5] 郑正足.切片机：中国，201020240150.7［P］.2011—04—06.
[6] 文怀兴，李新博.大枣去核机构的设计与分析［J］.食品与机械,2013,29（4）：112~114.
[7] 文怀兴，周改梅，俞祖俊，等. 一种大枣自动去核设备：中国，201420685125.9［P］.2014—11—19.
[8] 郑甲红，朱建儒.机械原理［M］.北京：机械工业出版社，2006：59~63.
[9] 文怀兴，周改梅，俞祖俊，等. 一种大枣自动去核装置：中国，201420685125.8［P］.2014—11—19.