Abstract
In order to solve the problem of high tobacco temperature upstream cylinder and irrational design of deflector, which caused much tobacco break, tobacco stick and wet tobacco mass, the Humidition of Tobacco is optimized and improved by adding a low pressure blower for cooling belt, and improving cylinder deflector.The results of application showed that the tobacco temperature upstream cylinder could be fallen from 65 ℃ to 40 ℃ with blower, 590 full pressure, work at 15 Hz, and the tobacco break is little, tobacco stick and wet tobacco mass were also descend. The transformations reach the goal of improving product quality, and reducing tobacco consumption.
Publication Date
10-28-2015
First Page
146
Last Page
148
DOI
10.13652/j.issn.1003-5788.2015.05.038
Recommended Citation
Fubin, SU and Wei, ZHANG
(2015)
"Optimization and improvement of humidition of tobacco system,"
Food and Machinery: Vol. 31:
Iss.
5, Article 38.
DOI: 10.13652/j.issn.1003-5788.2015.05.038
Available at:
https://www.ifoodmm.cn/journal/vol31/iss5/38
References
[1] 王兵, 杨达辉, 林平, 等. 新的卷烟生产工序品质评价方法的建立［J］. 烟草科技, 2002(11): 16～18.
[2] 罗登山, 姚光明, 刘朝贤. 中式卷烟加工工艺技术探讨［J］. 烟草科技, 2005(5):4～8.
[3] 崔伟, 李洪涛, 王海滨, 等. 提高CO2膨胀烟丝内在质量的技术研究［J］. 食品与机械, 2012, 28(5): 216～219.
[4] 国家烟草专卖局. 卷烟工艺规范［M］. 北京: 中央文献出版社, 2003.
[5] 韦小玲, 康金岭. 管板式烘丝机工艺参数对卷烟香气的影响［J］. 食品与机械, 2012, 28(6): 193～196.
[6] 康金岭, 黄贤飞, 刘远涛, 等. 预处理工艺对烟梗回透率的影响［J］. 食品与机械,2012, 28(6): 205～208.
[7] 孙哲建,丁伟,吴贵平，等.RC-80叶丝回潮机的改造研究［J］. 湖南文理学院学报, 2011(9):79～80,84.
[8] 刘磊, 刘斌. 关于CO2膨胀叶丝生产线回潮系统的改进［C］//中国烟草学会工业专业委员会烟草机械学术研讨会论文集.［出版地不详］：［出版者不详］，2008：53~55.
[9] 张文杰. RC-80再回潮筒稳压净水系统的改进［J］. 安徽烟草科技, 2000(3): 17～18.
[10] 韦小玲, 康金岭, 徐吉铭, 等. 叶丝回潮过程加水比例对膨胀丝整丝率的影响［J］. 食品与机械, 2013, 29(2):41～43.
[11] 周俊, 王艳伟. 隧道式烟丝流动冷却机对烟丝质量的影响探讨 ［J］. 广西烟草,2003(4):27～29.
[12] 邓国栋, 王宏生, 李斌, 等. 滚筒烘丝机中烟丝运动的模拟与试验［J］. 烟草科技, 2007（9）: 13～17
[13] 苏福彬, 张伟, 江家森, 等. 叶丝回潮系统: 中国, 201420036894.5［P］. 2014—07—09.