Abstract
In the CAM guide development process of automatic wonton machine, presents a new method of digital design and manufacturing of complex parts based on reverse engineering. The reverse engineering technology was used to realize the product development by the study of product data acquisition, the point cloud processing, surface fitting, surface parameterization modeling, digital manufacturing stages. Established the strategy of data acquisition, put forward the different method of point cloud processing, designed the scheme of surface parameterization modeling, and inspected surface quality and manufacturing process using modern means. Solved the time-consuming traditional top-down design, test difficulty and high cost, and provided a valuable experience for the application of reverse engineering technology in food machine.
Publication Date
10-28-2015
First Page
149
Last Page
152
DOI
10.13652/j.issn.1003-5788.2015.05.039
Recommended Citation
Fenxia, LI and Jieming, YANG
(2015)
"Application of reverse engineering technology in food machine,"
Food and Machinery: Vol. 31:
Iss.
5, Article 39.
DOI: 10.13652/j.issn.1003-5788.2015.05.039
Available at:
https://www.ifoodmm.cn/journal/vol31/iss5/39
References
[1] 王霄. 逆向工程技术及其应用[M]. 北京: 化学工业出版社, 2004: 89.
[2] 朱建能, 周继伟, 吴正洪, 等. 基于逆向工程的零件反求设计与制造[J]. 硅谷, 2012(11): 46～48.
[3] 吴迎春. 基于Geomagic和UG的逆向工程造型与制造应用[J]. 机械制造与自动化, 2010, 39(5): 120～122.
[4] 胡影峰. Geomagic Studio软件在逆向工程后处理中的应用[J]. 制造业自动化, 2009, 31(9): 135～138.
[5] 安晓超. 汽车覆盖件逆向重构及拉延成形数值模拟[D]. 镇江: 江苏大学, 2008.
[6] 吴克. 基于逆向工程的吉普车外覆盖件造型建模方法研究[D]. 哈尔滨: 哈尔滨理工大学, 2013.
[7] 李江雄, 柯映林. 基于特征的复杂曲面反求建模技术研究[J]. 机械工程学报, 2000, 36(5): 18～22.
[8] 吕汉明, 王扬. 用于三角网格模型的启发式四边区域划分算法[J]. 吉林大学学报(工学版), 2008, 38(l): 158～160.
[9] 元庆凯, 葛正浩, 王金水, 等. 逆向工程在塑料产品数字化设计与制造中的应用[J]. 机械设计与制造, 2010(10): 89～91.