Abstract
A new automatic vending machine was designed. The principle of the selecting and pushing of vending machine was introduced, and the three dimensional model was established. The software ADAMS was used to carry out dynamic simulation and optimization analysis. The vending machine can transport the goods to outlet rapidly and steadily. When the pushing velocity was kept at the speed of 150 mm/s left and right, the goods have low wiggle and high stability, and it can provide the experimental basics for the practical design. In the case of equal occupancy area, comparing to the height of the market vending machine of drink and wine, this vending machine is about 1/3 high to that on the market. with lower whole volume and higher storage amount, It is not only satisfied with the use of the general population, but also convenient to operate for the short and small crowd.
Publication Date
3-28-2016
First Page
109
Last Page
112
DOI
10.13652/j.issn.1003-5788.2016.03.023
Recommended Citation
Haigang, LIU; Gang, WANG; and Jianbiao, GAO
(2016)
"Design and analysis of a new automatic vending machine,"
Food and Machinery: Vol. 32:
Iss.
3, Article 23.
DOI: 10.13652/j.issn.1003-5788.2016.03.023
Available at:
https://www.ifoodmm.cn/journal/vol32/iss3/23
References
[1] 方子帆, 舒刚, 何孔德,等. 齿轮传动多体接触动力学模型[J]. 机械传动, 2009(1): 15-18.
[2] 郑建兴, 张相炎. 基于RecurDyn的同步带弹箱动态特性仿真研究[J]. 火炮发射与控制学报, 2010(4): 75-78.
[3] 梁志民, 安宗文, 李朝晖, 等. 链速补偿机构设计[J].甘肃工业大学学报, 2003(2): 47-49.
[4] 张玲玲, 陆天伟, 吴鹿鸣, 等. 链传动多边形的实验研究[J]. 机械工程与自动化, 2010(8): 97-99.
[5] 魏衍侠. 基于ADAMS手抛式机器人碰撞动力学分析[J]. 机械工程与自动化, 2011(2): 82-85.
[6] 张文斌. 小型多用捣碎机的设计[J]. 食品与机械, 2015, 31(2): 165-167.
[7] 余世明, 晁岳磊, 繆仁将. 自动售货机研究现状与展望[J]. 中国工程科学, 2008, 10(7): 51-56.
[8] 徐灏. 机械设计手册: 第3卷[M]. 北京: 机械业出版社, 1991(1): 10-86.
[9] 陈立平. 机械系统动力学分析及ADAMS应用教程[M]. 北京: 清华大学出版社, 2005: 1-223.