Abstract
To solve the problems of ET22 Pneumatic Separator for high-speed belt machine, which is easy to deviation and pneumatic separator chamber leakage of large amount of material, two methods were put forward. On the one hand, transformed the fixed type of retaining belt into a movable type to ensure side seal, avoided material into high speed belt conveyor main roller and the driven roller caused by high speed belt deviation, on the other hand in the pneumatic separator chamber installed wind guiding device, and the wind was guided to the end of halftone, through the wind on the halftone back materials anti blowing, reduced Pneumatic Separator material leakage. After improvement, the improved high speed belt deflection device alarm number from the original 16~24 / down to 0~9 times per month, wind positions lower body leakage decreased by 36.2%~66%.
Publication Date
9-28-2016
First Page
74
Last Page
76
DOI
10.13652/j.issn.1003-5788.2016.09.018
Recommended Citation
Liangbin, ZHANG; Fuwei, LUO; Mingdeng, FAN; and Dayong, XU
(2016)
"Improvement and application of ET22 pneumatic separator,"
Food and Machinery: Vol. 32:
Iss.
9, Article 18.
DOI: 10.13652/j.issn.1003-5788.2016.09.018
Available at:
https://www.ifoodmm.cn/journal/vol32/iss9/18
References
［1］ 国家烟草专卖局. 烟叶打叶复烤工艺规范［S］. 北京: 中国标准出版社, 2001.
［2］ 付贺云, 任崇桥, 范振东. 高海拔地区风分器风选风机的选型探讨［J］. 中国机械, 2014(19): 154-155.
［3］ 罗海燕, 方文青, 谢鑫, 等. 打叶质量与出片率的关系［J］. 烟草科技, 2005(1): 8-10.
［4］ 刘其聪, 夏正林, 罗登山. 影响打叶质量的因素分析与降低烟叶损耗［J］. 烟草科技, 1998(3): 3-5.
［5］ 罗海燕, 方文青, 杨林波, 等. 叶中含梗率与相关打叶质量指标的关系［J］. 烟草科技, 2005(7): 11-13.
［6］ 陈家东, 陶智麟, 刘全喜. 打叶复烤加工过程造碎及碎片处理工艺研究［J］. 烟草科技, 2000(4): 4-7.
［7］ 罗登山, 姚光明, 刘朝贤. 中式卷烟加工工艺技术探讨［J］. 烟草科技, 2005(5): 4-8.
［8］ 张忠峰, 齐海涛, 杨江涛. 风分器中气流抛料器的设计应用［J］. 烟草科技, 2011(5): 19-21.
［9］ 吕耀印, 王涛, 杜阅光, 等. 一级打叶单元出叶量及其分布对叶片质量的影响［J］. 烟草科技, 2013(2): 12-15.
［10］ 任崇桥. 新型高效节能打叶风分机组的研究［D］. 哈尔滨: 哈尔滨工业大学, 2008: 38-39.
［11］ 福建省龙岩金叶复烤有限责任公司. 高速皮带活动式挡边: 中国, 201520320839.3［P］. 2015-05-19.
［12］ 福建省龙岩金叶复烤有限责任公司. 一种风分器导风装置: 中国, CN204544749U［P］. 2015-08-12.