Abstract
In order to solve the problems in duck slaughter machinery process, including low level of automation and low production efficiency, an automatic eviscerating machine was researched and designed. Moreover, the machine structure and its working principle were analyzed. The key components of the manipulator unit were analyzed, designed in coordination and corrected its cam curves based on the related theory of cam. Creo3.0 was used to establish the three-dimensional model of multiple trails cylindrical cam, and the kinematics simulation was analyzed in the software at the same time, to support the cam. Spindle was analyzed and rigidity check. The test results showed that under different production, the average integrity rate of number of internal organs was 94.5%, and the average morphological integrity was 91.06%.
Publication Date
6-28-2017
First Page
93
Last Page
100
DOI
10.13652/j.issn.1003-5788.2017.06.019
Recommended Citation
Daolu, WANG; Jinpeng, YE; Youhe, DING; Junqiang, JIANG; and Nan, GUO
(2017)
"Design and experiment of QNZ24 type eviscerating machine for duck,"
Food and Machinery: Vol. 33:
Iss.
6, Article 19.
DOI: 10.13652/j.issn.1003-5788.2017.06.019
Available at:
https://www.ifoodmm.cn/journal/vol33/iss6/19
References
[1] 叶金鹏, 薛庆林, 王子戡, 等. 我国水禽屠宰加工关键技术装备及发展趋势[J]. 肉类工业, 2005(12): 1-4.
[2] 张奎彪. 中国家禽屠宰加工技术及装备在“十二五”期间的发展目标[J]. 肉类工业, 2011(3): 8-11.
[3] 王猛, 李阳阳, 叶金鹏. 家禽自动掏膛机械手的发展和应用现状[J]. 农产品加工·学刊, 2014(5): 62-64.
[4] 马朋巍, 王丽红, 叶金鹏, 等. 家禽自动取内脏技术及装备在我国的应用前景[J]. 农产品加工·学刊, 2009(10): 93-96.
[5] 马朋巍. 扒取式家禽取内脏机械手结构及运动参数研究[D]. 北京: 中国农业机械化科学研究院, 2010: 8-25.
[6] 王猛. 夹取式家禽自动掏膛机械手结构和运动参数的研究[D]. 北京: 中国农业机械化科学研究院, 2014: 1-35.
[7] 王丽红, 阎楚良, 叶金鹏, 等. QNZ15型家禽自动取内脏机设计与试验[J]. 农业机械学报, 2010(s1): 220-224.
[8] 王丽红. 基于数字化设计的家禽取内脏机关键技术研究[D]. 北京: 中国农业机械化科学研究院, 2011: 14-85.
[9] 邢东杰, 张奎彪, 张文辉. 一种家禽自动净膛机: 中国, 201220566234[P]. 2012-10-31.
[10] 尚久浩, 张淳, 李思益. 自动机械设计[M]. 北京: 中国轻工业出版社, 2014: 52-61.
[11] 刘昌祺, 刘庆立, 蔡昌蔚. 自动机械凸轮机构实用设计手册[M]. 北京: 科学出版社, 2013: 18-50.
[12] 葛正浩, 杨芙莲, 彭国勋, 等. 凸轮机构运动学研究综述[J]. 机械设计, 2001, 18(3): 4-5.
[13] 钟日铭. Creo3.0装配设计与产品设计从入门到精通[M]. 北京: 机械工业出版社, 2015: 189-245.
[14] 余剑武, 舒新, 罗红, 等. 灌装机中弧面凸轮建模与造型研究[J]. 食品与机械, 2016, 32(6): 77-82.
[15] 韩炬, 曹利杰, 张宏宇. 基于Creo Parametric“轨迹曲线”的袋成型包装机热封凸轮轮廓线设计[J]. 食品与机械, 2016, 32(6): 83-86.