Abstract
To obtain the regularity between the heat transfer characteristics of wok and the control of Chinese cooking operation and establish a Chinese wok performance evaluation method, three kinds of Chinese woks were selected to study the influence of the thermal resistance coefficient on the maturation time and the initial scorching time of pork tenderloin at different preheating temperature and mixing frequency. The results showed that the quality characteristics of pork tenderloin, such as color, moisture content and shear force, were obviously changed when it was fry to matured and scorched, and the color could be used as an intuitive judgment indicator of the culinary end point and scorch in oil frying.
Publication Date
6-28-2018
First Page
70
Last Page
74
DOI
10.13652/j.issn.1003-5788.2018.06.015
Recommended Citation
Jing, PENG; Li, DENG; Lei, WANG; Congying, HE; Bingyan, YU; Jin, LIN; and Jie, CUI
(2018)
"Effect of heat transfer characteristics of cookware on the control of Chinese cooking operation,"
Food and Machinery: Vol. 34:
Iss.
6, Article 15.
DOI: 10.13652/j.issn.1003-5788.2018.06.015
Available at:
https://www.ifoodmm.cn/journal/vol34/iss6/15
References
[1] 邓力. 中式烹饪热/质传递过程数学模型的构建[J]. 农业工程学报, 2013, 29(3): 285-292.
[2] 王晓东. 炒锅产品发展前景分析[J]. 现代家电, 2008(23): 44-47.
[3] 王振华. 品质与创新驱动炊具行业稳健发展[J]. 现代家电, 2014(3): 52-54.
[4] 邓力. 基于时间温度积分器将手工烹饪转变为自动烹饪的方法[J]. 农业工程学报, 2013, 29(6): 287-292.
[5] SEDIGHI M, BEHNAM N D. A review of thermal and mechanical analysis in single and bi-layer plate[J]. Materials Physics and Mechanics, 2012, 14(1): 37-46.
[6] DARDASHTI B N, SEDIGHI M R. Numerical solution of heat transfer for single and multi-metal pan[J]. Applied Mechanics and Materials, 2012, 148-149: 227-231.
[7] AYATA T, YCEL Y. Effect of the section geometry of saucepan base on the energy consumption: an experimental study[J]. Heat & Mass Transfer, 2016, 53(4): 1-7.
[8] VILLACS S, MARTNEZ J, RIOFRO A J, et al. Energy efficiency analysis of different materials for cookware commonly used in induction cookers[J]. Energy Procedia, 2015, 75: 925-930.
[9] ZHAO Z, WONG T T, LEUNG C W, et al. Wok design: thermal-performance influencing parameters[J]. Applied Energy, 2006, 83(4): 387-400.
[10] KARUNANITHY C, SHAFER K. Heat transfer characteris-tics and cooking efficiency of different sauce pans on various cooktops[J]. Applied Thermal Engineering, 2016, 93: 1 202-1 215.
[11] SANZ-SERRANO F, SAGUES C, LLORENTE S. Inverse modeling of pan heating in domestic cookers[J]. Applied Thermal Engineering, 2016, 92: 137-148.
[12] LOMOLINO G, CRAPISI A, CAGNIN M. Study of elements concentrations of European seabass ( Dicentrarchus labrax ) fillets after cooking on steel, cast iron, teflon, aluminum and ceramic pots[J]. International Journal of Gastronomy & Food Science, 2016, s 5-6: 1-9.
[13] FABRE R, DALZOTTO G, PERLO F, et al. Cooking method effect on Warner-Bratzler shear force of different beef muscles[J]. Meat Science, 2018, 138(1): 10-14.
[14] 高海薇. 中西烹调方法的比较[J]. 四川烹饪高等专科学校学报, 2001(4): 20-22.
[15] SEDIGHI M R, DARDASHTI B N. Heat transfer modeling in multi-layer cookware using finite element method [J]. International Journal of Science and Engineering Investigations, 2012, 1(1): 97-103.
[16] FEYISSA A H, GERNAEY K V, ASHOKKUMAR S, et al. Modelling of coupled heat and mass transfer during a contact baking process[J]. Journal of Food Engineering, 2011, 106(3): 228-235.
[17] AYATA T. Temperature distributions in a copper and aluminium layered base of a CrNi steel sauce pan[J]. Applied Energy, 2005, 80(4): 341-347.
[18] PHAM HN, FUJITA H, OZAKI K, et al. Estimating method of heat distribution using 3-D resistance matrix for zone-control induction heating systems[J]. IEEE Trans Power Electron, 2012, 27(7): 3 374-3 382.
[19] 邓力. 烹饪过程动力学函数、优化模型及火候定义[J]. 农业工程学报, 2013, 29(4): 278-284.
[20] 邓力. 炒的烹饪过程数值模拟与优化及其技术特征和参数的分析[J]. 农业工程学报, 2013, 29(5): 282-292.
[21] SEDIGHI M, SALARIAN H, TAHERIAN H. Material dependence of temperature distribution in multi-layer multi-metal cookware[J]. Journal of Engineering Science & Technology, 2017, 12(9): 2 333-2 345.
[22] 黄明, 黄峰, 张首玉, 等. 热处理对猪肉食用品质的影响[J]. 食品科学, 2009, 30(23): 189-192.
[23] SASAKI K, MOTOYAMA M, YASUDA J, et al. Beef texture characterization using internationally established texture vocabularies in ISO 5492: 1992: Differences among four different end-point temperatures in three muscles of Holstein steers [J]. Meat Science, 2010, 86(2): 422-429.
[24] SINHA R, KNIZE M G, SALMON C P, et al. Heterocyclic amine content of pork products cooked by different methods and to varying degrees of doneness[J]. Food & Chemical Toxicology An International Journal Published for the British Industrial Biological Research Association, 1998, 36(4): 289-297.
[25] 闫勇, 邓力, 何腊平, 等. 猪里脊肉烹饪终点成熟值的测定[J]. 农业工程学报, 2014, 30(12): 284-292.
[26] 周杰, 邓力, 闫勇, 等. 烹饪传热学及动力学数据采集分析系统的研制[J]. 农业工程学报, 2013, 29(23): 241-246.
[27] 王教方, 岳贤军. 多层复合材料导热系数测定方法的研究[J]. 济南大学学报: 自然科学版, 2000, 14(3): 258-260.
[28] 刘响, 张秀华, 田志宏, 等. 激光闪射法测量碳复合耐火材料导热系数的影响因素[J]. 工程与试验, 2013, 53(4): 37-45.
[29] RUBIO B, MARTNEZ B, GARCA-CACHN M D, et al. Effect of the packaging method and the storage time on lipid oxidation and colour stability on dry fermented sausage salchichón manufactured with raw material with a high level of mono and polyunsaturated fatty acids[J]. Meat Science, 2008, 80(4): 1 182-1 187.
[30] RAMIREZ-SUAREZ J C, MORRISSEY M T. Effect of high pressure processing (HPP) on shelf life of albacore tuna (Thunnus alalunga) minced muscle[J]. Innovative Food Science & Emerging Technologies, 2006, 7(1/2): 19-27.
[31] YOUNG O A, WEST J. Meat science and application[M]. New York: Marcel Dekker Inc., 2001.
[32] 纪有华. 烹饪过程中美拉德反应对菜肴的影响[J]. 美食研究, 2006, 23(4): 32-36.
[33] DATTA A K. Porous media approaches to studying simultaneous heat and mass transfer in food processes I: Problem formulations[J]. Journal of Food Engineering, 2007, 80(1): 96-110.
[34] 廖国周. 烧烤肉制品中杂环胺形成规律研究[D]. 南京: 南京农业大学, 2008: 5-6.
[35] 汪孝, 邓力, 李双艳, 等. 油炒温度对猪肉水分的影响[J]. 食品科技, 2017, 42(7): 128-133.
[36] 崔俊. 爆炒烹饪的CFD数值模拟及功率测定研究[D]. 贵阳: 贵州大学, 2017: 56-57.