Abstract
In order to investigate the hardness variation of slim acetate fiber filter rod (hereinafter referred to as slim filter rod) and improve the quality of slim filter rod, the influencing factors of the dosage of glycerol triacetate, the temperature of glycerol triacetate, the natural curing time of slim filter rod, the filling amount of acetate tow, the permeability of plug wrap paper, the circumference of slim filter rod and the pressure drop on the hardness of slim filter rod were studied. The results showed that the effect of the dosage of glycerol triacetate on the hardness of the slim filter rod and the filter rod was the same under the condition of natural curing for 1 day. The hardness of the slim filter rod increased with the increase of the dosage of glycerol triacetate in the range of 5%～23% under the control of the conditions of natural curing for 2～5 days. Within 5 days of natural curing, the hardness of the slim filter rod increased rapidly, and slowed down within 5～30 days. There was no correlation between the temperature of glycerol triacetate and the mean hardness and the stability of the slim filter rod. The hardness of the slim filter rod increased with the filling amount of acetate tow. The hardness of the slim filter rod increased with the increase of the permeability of plug wrap paper. The circumference of the slim filter rod was negatively correlated with the hardness. The pressure drop of the slim filter rod was correlated with the hardness.
Publication Date
10-28-2019
First Page
140
Last Page
144,173
DOI
10.13652/j.issn.1003-5788.2019.10.028
Recommended Citation
Ye, XU; Peixiu, SHENG; and Dongyue, ZONG
(2019)
"Study on the influencing factors of hardness of slim acetate fiber filter rod,"
Food and Machinery: Vol. 35:
Iss.
10, Article 28.
DOI: 10.13652/j.issn.1003-5788.2019.10.028
Available at:
https://www.ifoodmm.cn/journal/vol35/iss10/28
References
[1] 高明奇, 顾亮, 李明哲, 等. 在线打孔参数对细支卷烟理化指标的影响[J]. 食品与机械, 2017, 33(11): 200-203.
[2] 高明奇, 顾亮, 李明哲, 等. 不同规格中细支卷烟醋纤丝束性能研究[J]. 食品与机械, 2017, 33(6): 196-120.
[3] 常纪恒, 阮晓明, 赵荣, 等. 滤棒物性参数之间的相关关系[J]. 烟草科技, 2003(10): 9-12.
[4] 倪克平, 范铁桢, 王涛. 卷烟硬度、吸阻与单支重量相关性分析[J]. 烟草科技, 2002(3): 9-11.
[5] 邢军, 周德成, 刘锋, 等. 影响卷烟滤棒硬度测试的因素分析[J]. 烟草科技, 2009(2): 16-20.
[6] 汪波. 影响滤棒硬度因素的研究[C]// 黑龙江省2009年度烟草学术交流研讨会论文集. 哈尔滨: [出版者不详], 2009: 368-372.
[7] 常纪恒, 常建勇, 盛培秀, 等. 丝束卷曲特性与滤棒物理特性的关系[J]. 烟草科技, 2011(8): 9-12.
[8] 李来东, 金钟国, 吕英敏. 浅谈三醋酸甘油酯温度变化对滤棒硬度及丝油比的影响[C]// 黑龙江省2009年度烟草学术交流研讨会论文集. 哈尔滨: [出版者不详], 2009: 439-442.
[9] 朱翠萍. 提高烟用滤棒硬度方法的探讨[J]. 财经界: 学术版, 2013(19): 206-261.
[10] 李莉, 黄燕如, 丘萍. 增塑剂固化时间对滤棒质量的影响分析[C]// 中国烟草学会工业专业委员会烟草工艺学术研讨会论文集. 南宁: [出版者不详], 2009: 195-198.
[11] 黄幼斌. 影响卷烟滤棒硬度的因素分析[J]. 大众科技, 2012, 14(6): 34-35.