Abstract
Aiming at the conveying characteristics of the horizontal screw conveyor under the action of gravity, a simplified model of the conveying motion is proposed, and the constraint relationship between the parameters is calculated inference. By calculating the relationship between the conveying speed of the screw conveyor and the height of the material drop, the concept of “full filling state” is proposed, and the relationship between the design speed and other dimensional parameters in this state is calculated; the material conveying is determined. The minimum blanking length in the axial direction; through the calculation of each parameter, the relationship between the conveying amount and the rotational speed is obtained.
Publication Date
6-28-2019
First Page
96
Last Page
99
DOI
10.13652/j.issn.1003-5788.2019.06.017
Recommended Citation
Wei, LIU; Qian, TANG; Zongmin, LIU; and Pinghua, LIANG
(2019)
"The movement model construction and parametric design of horizontal screw conveyor,"
Food and Machinery: Vol. 35:
Iss.
6, Article 17.
DOI: 10.13652/j.issn.1003-5788.2019.06.017
Available at:
https://www.ifoodmm.cn/journal/vol35/iss6/17
References
[1] 胡建平, 郑昌华. 螺旋输送机、斗式提升机和振动输送机[M]. 北京: 机械工业出版社, 1991: 1-30.
[2] 杨健, 李新闻, 柳伟兵. 挤出式奶油输送机特性分析及优化设计[J]. 食品与机械, 2018, 34(7): 78-82.
[3] 朱斌昕. 粮食装卸输送机械[M]. 北京: 中国财政经济出版社, 1984: 342.
[4] 张东海. 螺旋输送机的优化研究[D]. 大连: 大连理工大学, 2006: 1-25.
[5] 向冬枝, 徐余伟. 螺旋输送机设计参数的选择和确定[J]. 水泥技术, 2010(1): 29-33.
[6] 梅潇, 王伟, 刘海洋, 等. 大倾角螺旋输送机中物料颗粒的运动特性研究[J]. 机械设计与制造, 2018(2): 14-17.
[7] ALTIERI G, RENZO G C D, GENOVESE F. Horizontal centrifuge with screw conveyor (decanter): Optimization of oil/water levels and differential speed during olive oil extraction[J]. Journal of Food Engineering, 2013, 119(3): 561-572.
[8] OWEN P J, CLEARY P W. Prediction of screw conveyor performance using the Discrete Element Method (DEM)[J]. Powder Technology, 2009, 193(3): 274-288.
[9] PEZO L, JOVANOVIC A, PEZO M, et al. Modified screw conveyor-mixers-Discrete element modeling approach[J]. Advanced Powder Technology, 2015, 26(5): 1 391-1 399.
[10] 程韦武, 庞莲香, 蓝同平. 螺旋输送机的设计[J]. 现代制造技术与装备, 2018(4): 1-3.
[11] 贾朝斌, 程珩. 螺旋输送机参数化设计方法研究[J]. 机械设计与制造, 2015(4): 206-208, 213.
[12] 戚江涛, 李亚萍, 蒙贺伟, 等. 螺旋给料装置研究现状分析及建议[J]. 新疆农垦科技, 2017, 40(10): 30.