Abstract
A laser scanning contour measuring device for brown rice was developed. The mechanism principle of the device was adapted to the point cloud data collection representing the geometric characteristics of brown rice. It has the functions of mutually vertical triaxial movement and two-axis rotation to realize the circular sweep of the ellipsoid of brown rice, the deflection of the embryo and the linear sweep of its main section. The ellipsoid of brown rice was measured by circular discrete and continuous laser scanning. The results showed that the continuous and discrete scanning data were consistent in describing the surface of brown rice, and the errors met the test requirements. The experimental device could realize the effective data acquisition of the main section of germ by linear discrete scanning.
Publication Date
4-28-2021
First Page
108
Last Page
112,138
DOI
10.13652/j.issn.1003-5788.2021.04.020
Recommended Citation
Si-ping, YANG; Xiao-hua, TANG; Tian-jiao, LI; Long-an, ZHENG; and Jia-qiang, AN
(2021)
"Development of a continuous laser scanning electromechanical system for brown rice profile cross section,"
Food and Machinery: Vol. 37:
Iss.
4, Article 20.
DOI: 10.13652/j.issn.1003-5788.2021.04.020
Available at:
https://www.ifoodmm.cn/journal/vol37/iss4/20
References
[1] YADAV B K, JINDAL V K. Monitoring milling quality of rice by image analysis[J]. Computers & Electronics in Agriculture, 2001, 33(1): 9-33.
[2] 许俐. 机器视觉测量大米留胚率的研究[J]. 江苏理工大学学报, 1997(6): 8-11.
[3] 黄星奕, 吴守一. 用神经网络方法进行大米留胚率自动检测的研究[J]. 农业工程学报, 1999, 15(4): 187-191.
[4] 黄星奕, 吴守一, 方如明, 等. 计算机视觉在大米胚芽识别中的应用[J]. 农业机械学报, 2000, 31(1): 62-65.
[5] 何超. 留胚米胚芽完整度在线检测方法研究[D]. 哈尔滨: 哈尔滨工程大学, 2018: 47-55.
[6] ZAREIFOROUSH H, MINAEI S, ALIZADEH M R, et al. A hybrid intelligent approach based on computer vision and fuzzy logic for quality measurement of milledrice[J]. Measurement, 2015, 66: 26-34.
[7] PEREZ J H, TANAKA F, UCHINO T. Comparative 3D simulation on water absorption and hygroscopic swelling in japonica rice grains under various isothermal soaking conditions[J]. Food Research International, 2011, 44(9): 2 620-2 623.
[8] PEREZ J H, TANAKA F, UCHINOT. Modeling of mass transfer and initiation of hygroscopically induced cracks in rice grains in a thermally controlled soaking condition: With dependency of diffusion coefficient to moisture content and temperature: A 3D finite element approach[J]. Journal of Food Engineering, 2012, 111(3): 519-527.
[9] FANT E, CASADY W, GOHD, et al. Grey-scale intensity as a potential measurement for degree of rice milling[J]. Journal of Agricultural Engineering Research, 1994, 58(2/3): 89-97.
[10] 刘彩玲, 马拓, 王亚丽, 等. 基于三维激光扫描的水稻种子离散元建模及试验[J]. 农业工程学报, 2016, 32(15): 294.
[11] 陈晨, 吴崇友, 江涛. 基于逆向工程的水稻精准模型构建及试验验证[J]. 农机化研究, 2017, 39(10): 46-52.
[12] 曹鹏, 尹文庆, 吴林华, 等. 基于激光传感器的稻种轮廓形状测量方法研究[J]. 传感器与微系统, 2017, 36(3): 29-32.
[13] 孔祥亮, 汤晓华, 吴星宇, 等. 激光扫描糙米三维可视化数字建模[J]. 食品与机械, 2017, 33(6): 84-88.
[14] 郝方涛, 汤晓华, 孔祥亮, 等. 糙米轮廓激光扫描测量系统研究与开发[J]. 中国新技术新产品, 2018(6): 6-9.
[15] 吴婧, 汤晓华, 杨泗苹, 等. 基于激光点云数据的糙米表面三维模型重建[J]. 食品与机械, 2019, 35(12): 19-22, 28.
[16] 樊强, 陈大为, 习俊通. 高精度激光点扫描三维测量系统及应用[J]. 上海交通大学学报, 2006, 40(2): 227-230.
[17] 默里. 机器人操作的数学导论[M]. 北京: 机械工业出版社, 1998: 51-53.