Influence of cigarette paper parameters on cigarette ash holding capacity

Authors

LI Huan, College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou, Henan 450000, China
WANG Jian-min, College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou, Henan 450000, China
WANG Hao-li, College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou, Henan 450000, China
DAI Cun-di, College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou, Henan 450000, China

Abstract

In order to explore the influence of cigarette paper on ash holding capacity under smoking and burning conditions, 12 cigarette samples with different cigarette paper parameter combinations were designed and prepared by uniform experimental design with quantitative, air permeability, magnesium carbonate addition, sodium potassium ratio of combustion supporting agent, acid radical type and combustion supporting agent dosage as parameters. The effects of cigarette paper parameters on ash holding capacity were studied by single factor analysis and regression analysis The parameters of cigarette paper were optimized. Results: ① with the change of cigarette paper parameters, the ash holding capacity ranged from 39.07 mm to 43.76 mm, and the change rate was 12.0%. ② The combined action of air permeability, sodium potassium ratio, magnesium carbonate content and acid radical type could explain 92.3% of the variation of ash holding capacity, which was the main factor affecting ash holding capacity, and the order was air permeability, sodium potassium ratio, magnesium carbonate content, acid radical type; quantitative and combustion aid dosage were the secondary factors affecting ash holding capacity, and the direction and degree of the influence on ash holding capacity were similar to the above four parameters, which was related to the combination of numbers. ③ The optimal combination of cigarette paper parameters was 40 g/m², 50 CU air permeability, 0% magnesium carbonate, 5.0 ratio of sodium to potassium, the type of acid radical of chloride ion, combustion supporting agent dosage 2.0%.

Publication Date

6-28-2021

First Page

207

Last Page

212

DOI

10.13652/j.issn.1003-5788.2021.06.034

Recommended Citation

Huan, LI; Jian-min, WANG; Hao-li, WANG; and Cun-di, DAI (2021) "Influence of cigarette paper parameters on cigarette ash holding capacity," Food and Machinery: Vol. 37: Iss. 6, Article 34.
DOI: 10.13652/j.issn.1003-5788.2021.06.034
Available at: https://www.ifoodmm.cn/journal/vol37/iss6/34

References

[1] 许艳冉, 王建民, 惠建全, 等. 卷烟包灰及燃烧性能间的关系[J]. 云南化工, 2020, 47（3）: 45-49.
[2] 郑丰, 肖翠翠, 王小平, 等. 卷烟纸特性对卷烟静态包灰性能的影响[J]. 烟草科技, 2020, 53（3）: 82-88.
[3] 许艳冉, 刘舒畅, 穆林, 等. 烟丝和卷烟纸参数对卷烟包灰性能的影响[J]. 烟草科技, 2020, 53（12）: 67-74.
[4] 周非, 曾波, 牛润杰, 等. 卷烟持灰能力测定仪: CN201259499[P]. 2009-06-17.
[5] 黄启志, 吴雄会, 游志强, 等. 一种卷烟持灰力的测定方法: CN105783647A[P]. 2016-07-20.
[6] 余婷婷, 詹建波, 程量, 等. 纵向抗张能量吸收对卷烟纸包灰性能的影响[J]. 材料导报, 2017, 31（增刊1）: 384-387.
[7] 沈靖轩, 孙军, 肖维毅, 等. 助剂对卷烟纸包灰效果的影响[J]. 中华纸业, 2012, 33（14）: 23-26.
[8] 龚淑果, 樊华, 黄溢清, 等. 卷烟纸助燃剂设计对卷烟品质的影响[J]. 纸和造纸, 2011, 30（10）: 43-46.
[9] 李桂珍, 王平军. 卷烟纸添加剂对卷烟包灰性能影响的研究[J]. 造纸化学品, 2011, 23（4）: 17-21.
[10] 冯亚婕, 王建民, 梁淼, 等. 基于 ImageJ 的卷烟包灰值定量测定方法优化[J]. 食品与机械, 2018, 34（3）: 216-219.
[11] 楚文娟, 田海英, 彭桂新, 等. 基于卷烟材料参数的细支烟烟气有害成分预测模型[J]. 烟草科技, 2019, 52（9）: 46-54.
[12] 林维宣. 实验设计方法[M]. 大连: 大连海事大学出版社, 1995: 335-337.
[13] 成福, 肖洋, 王婷, 等. 均匀设计优化生香酵母产酯发酵工艺[J]. 中国酿造, 2020, 39（12）: 91-94.
[14] 曹巧娜, 白云起, 仝其根. 基于均匀设计的蛋酪蛋坯质构优化方案及风味分析[J]. 中国食品学报, 2020, 20（10）: 169-179.
[15] 马胜楠, 王建民, 冯亚婕, 等. 原子吸收法测定烟灰中金属元素含量的前处理方法改进[J]. 轻工学报, 2019, 34（5）: 32-39.
[16] 王丙参, 陈庆美, 魏艳华. 含定性变量回归模型的比较研究[J]. 宁夏师范学院学报, 2019, 40（10）: 21-26.
[17] 李熙, 武珏臣. 含定性变量的回归分析在公安情报预测中的应用[J]. 科技情报开发与经济, 2010, 20（16）: 132-134.
[18] 韩路, 田海英, 楚文娟, 等. 卷烟纸参数对细支卷烟燃烧锥落头倾向的影响[J]. 轻工学报, 2020, 35（1）: 79-84, 94.