Abstract
［Objective］ To improve the mechanization and automation of tender coconut processing.［Methods］ This paper designs a new tender coconut processing machine consisting of a compression rotating mechanism,a side -top integrated trimming mechanism,a clamping manipulator,and a bottom trimming mechanism.Mechanical analysis and calculation,3D modeling,and finite element analysis are carried out on the most critical side -top integrated trimming mechanism to optimize the design scheme.［Results］ The main factors influencing the trimming effect are ranked as the tool feed rate >tender coconut's rotation speed >tool trimming angle.The optimal parameter combination of the tender coconut processing machine is the tender coconut's rotation speed of 450 r/min,the tool feed rate of 1 mm/s,and the tool trimming angle of 16.7°.［Conclusion］ The success rate of coconut green processing of the developed machine reaches 100%,with the efficiency reaching 100 pieces/h.Thus,the machine has high engineering application significance.
Publication Date
4-3-2025
First Page
114
Last Page
119
DOI
10.13652/j.spjx.1003.5788.2024.60071
Recommended Citation
Fei, SHEN; Junqing, FAN; Baozhen, ZHANG; Zixin, WANG; and Liekun, LI
(2025)
"Design and experiment of tender coconut processing machines,"
Food and Machinery: Vol. 41:
Iss.
1, Article 14.
DOI: 10.13652/j.spjx.1003.5788.2024.60071
Available at:
https://www.ifoodmm.cn/journal/vol41/iss1/14
References
[1] 卢琨,侯媛媛.海南省椰子产业分析与发展路径研究 [J].广东农业科学,2020,47(6):145-151.LU K,HOU Y Y.Analysis and development path of coconut industry in Hainan Province [J].Guangdong Agricultural Sciences,2020,47(6):145-151.
[2] 刘蕊,弓淑芳,张照华.鲜食加工兼用型椰子种质鉴定和综合评价 [J].热带农业科学,2024,44(1):9-17.LIU R,GONG S F,ZHANG Z H.Germplasm identification and comprehensive evaluation of fresh-eating and processing type coconut [J].Chinese Journal of Tropical Agriculture,2024,44(1):9-17.
[3] 邓宝华,李向阳,杨建振,等.椰子副产物精深加工及高值利用研究进展 [J].中国果菜,2023,43(11):25-30.DENG B H,LI X Y,YANG J Z,et al.Research progress in deep processing and high value utilisation of coconut by-products [J].China Fruit & Vegetable,2023,43(11):25-30.
[4] 宋美静.海南椰子新零售与新冷链协同发展路径 [J].食品研究与开发,2022,43(21):229-230.SONG M J.Hainan coconut new retail and new cold chain collaborative development path [J].Food Research and Development,2022,43(21):229-230.
[5] 沈 晓 君,刘 蕊,王 媛 媛,等.椰 青 保 鲜 技 术 规 程 [J].科 技 视 界,2021 (32):21-22.SHEN X J,LIU R,WANG Y Y,et al.Technical regulations for preservation of coconut green [J].Science & Technology Vision,2021 (32):21-22.[6] PANDISELVAM R,MANIKANTAN M R,SUBHASHREE N,et al.Correlation and principal component analysis of physical properties of tender coconut (Cocos nucifera L.) in relation to the development of trimming machine [J].Journal of Food Process Engineering,2019,42(6):e13217.
[7] 伍湘君,樊军庆,毛舟,等.椰子剥衣机研究现状与发展趋势[J].食品与机械,2014,30(2):262-265,272.WU X J,FAN J Q,MAO Z,et al.Research status and developing tendency on coconut husking machine [J].Food & Machinery,2014,30(2):262-265,272.
[8] RATTANAPASKORN S.Design and development of semi-automatic cutting machine for young coconuts [J].Maejo International Journal of Science and Technology,2008,1:1.
[9] JARIMOPAS B,RUTTANADAT N.Development of a young coconut fruit trimming machine [J].Journal of Food Engineering,2007,79(3):752-757.
[10] JARIMOPAS B,RUTTANADAT N,TERDWONGWORAKUL A.An automatic trimming machine for young coconut fruit [J].Biosystems Engineering,2009,103(2):167-175.
[11] 张 聪.椰 青 在 线 连 续 切 削 成 型 设 备 设 计 [J].食 品 与 机 械,2019,35(4):97-102.ZHANG C.Design of the on-line continuous cutting equipment foryoung coconut [J].Food & Machinery,2019,35(4):97-102.
[12] 倪玮.椰青自动加工关键技术的研究与试验 [D].海口:海南大学,2021:12-15.NI W.Research and experiment on the key technology of coconut green automatic processing [D].Haikou:Hainan University,2021:12-15.
[13] 刘廷娇,李武朝,汝绍锋.自动转盘式剥椰塑型机结构设计及分析 [J].食品工业,2021,42(5):282-287.LIU T J,LI W Z,RU S F.Design and analysis of an automatic rotary coconut dehusking and shaping machine [J].The Food Industry,2021,42(5):282-287.
[14] PANDISELVAM R,MANIKANTAN M R,KOTHAKOTA A,et al.Engineering properties of five varieties of coconuts (Cocos nucifera L.) for efficient husk separation [J].Journal of Natural Fibers,2020,17(4):589-597.
[15] 汝绍锋,王居飞,樊军庆.蝼蛄爪趾特性仿生钢丝辊刷除椰衣 装 置 设 计 及 参 数 优 化 [J].农 业 工 程 学 报,2018,34(22):27-35.RU S F,WANG J F,FAN J Q.Design and parameter optimization of removing coconut fiber device by bionic steel wire roller brush based on characteristics of claw-toe [J].Transactions of the Chinese Society of Agricultural Engineering,2018,34(22):27-35.