Abstract
As a new food processing technology controlled by digitization,three -dimensional printing technology is featured with diverse shapes,material saving,and balanced nutrition.In modern food processing,more and more consumers have begun to pay attention to healthy food,which can not only alleviate the food shortage but also supplement certain nutrition.Therefore,the combination of 3D printing technology and these substances will become an important direction for the future development of modern food.Based on the discussion over equipment types commonly used in the process of 3D food printing,the current situation of the processing and application of 3D printing technology in health food is summarized.Approaches to improve the characteristics of 3D printed food are analyzed and compared,and the challenges and opportunities for these foods in 3D food printing in the future are predicted.
Publication Date
7-3-2025
First Page
236
Last Page
243
DOI
10.13652/j.spjx.1003.5788.2024.80864
Recommended Citation
Guoxia, WANG; Chunge, LI; Si, WU; Mengdan, LI; and Zongyu, SONG
(2025)
"Research progress of 3D printing technology in health food processing,"
Food and Machinery: Vol. 41:
Iss.
6, Article 32.
DOI: 10.13652/j.spjx.1003.5788.2024.80864
Available at:
https://www.ifoodmm.cn/journal/vol41/iss6/32
References
[1] 黎颖菁,尚小红,龙紫媛,等.广西药食同源植物种类分布、利用现状与展望 [J].中国热带农业,2022 (1):32-38.LI Y J,SHANG X H,LONG Z Y,et al.Species distribution,utilization status and prospects of medicinal and edible plants in Guangxi [J].China Tropical Agriculture,2022 (1):32-38.
[2] 黄璐琦,何春年,马培,等.我国药食两用物品产业发展战略思考 [J].中国工程科学,2022,24(6):81-87.HUANG L Q,HE C N,MA P,et al.Strategic thinking on the development of food-medicine industry [J].Strategic Study of CAE,2022,24(6):81-87.
[3] MANOJ A,PANDA R C.Biodegradable filament for 3D printing process:a review [J].Engineered Science,2022,18:11-19.
[4] NAVAF M,SUNOOJ K V,AALIYA B,et al.4D printing:a new approach for food printing;effect of various stimuli on 4D printed food properties.A comprehensive review [J].Applied Food Research,2022,2(2):100150.
[5] MATAS A,IGUAL M,GARCÍA-SEGOVIA P,et al.Application of 3D printing in the design of functional gluten-free dough [J].Foods,2022,11(11):1 555.
[6] 张志超,陈旭,汪少芸,等.氯化钠对鲢鱼糜体系 3D打印性能及凝胶特性的影响 [J].食品与机械,2024,40(4):1-6,46.ZHANG Z C,CHEN X,WANG S Y,et al.Effect of sodium chloride on 3D printing performance and gel properties of silver carp surimi system [J].Food & Machinery,2024,40(4):1-6,46.
[7] XING X B,CHITRAKAR B,HATI S,et al.Development of black fungus-based 3D printed foods as dysphagia diet:effect of gums incorporation [J].Food Hydrocolloids,2022,123:107173.
[8] YOU S Q,HUANG Q R,LU X X.Development of fat-reduced 3D printed chocolate by substituting cocoa butter with water-in-oil emulsions [J].Food Hydrocolloids,2023,135:108114.
[9] BURKE-SHYNE S,GALLEGOS D,WILLIAMS T.3D food printing:nutrition opportunities and challenges [J].British Food Journal,2020,123(2):649-663.
[10] HAMILTON A N,MIRMAHDI R S,UBEYITOGULLARI A,et al.From bytes to bites:advancing the food industry with three-dimensional food printing [J].Comprehensive Reviews in Food Science and Food Safety,2024,23(1):e13293.
[11] RAJA V,NIMBKAR S,MOSES J A,et al.Modeling and simulation of 3D food printing systems:scope,advances,and challenges [J].Foods,2023,12(18):3 412.
[12] 董茗洋,陈革,杨庆余.不同胶体对马铃薯淀粉基材料 3D打印特性的影响 [J].食品科学技术学报,2022,40(1):44-52.DONG M Y,CHEN G,YANG Q Y.Effect of different colloids on 3D printing properties of potato starch-based materials [J].Journal of Food Science and Technology,2022,40(1):44-52.
[13] 徐光辉,何冬婷,袁毅亦,等.基于 3D打印技术制备复方丹参缓控释制剂的研究 [J].今日药学,2022,32(2):117-119.XU G H,HE D T,YUAN Y Y,et al.Study on preparation of compound salvia miltiorrhiza sustained and controlled release preparation based on 3D printing technology [J].Pharmacy Today,2022,32(2):117-119.
[14] KARAVASILI C,GKARAGKOUNIS A,MOSCHAKIS T,et al.Pediatric-friendly chocolate-based dosage forms for the oral administration of both hydrophilic and lipophilic drugs fabricated with extrusion-based 3D printing [J].European Journal of Pharmaceutical Sciences,2020,147:105291.
[15] 余红燕,徐光辉,贾暖.3D打印技术在口服固体制剂中的应用研究进展 [J].中国现代应用药学,2021,38(16):2 033-2 038.YU H Y,XU G H,JIA N.Research progress of 3D printing technology in oral solid preparations [J].Chinese Journal of Modern Applied Pharmacy,2021,38(16):2 033-2 038.
[16] PRABHA K,GHOSH P,ABDULLAH S,et al.Recent development,challenges,and prospects of extrusion technology [J].Future Foods,2021,3:100019.
[17] AWAD A,FINA F,GOYANES A,et al.3D printing:Principles and pharmaceutical applications of selective laser sintering [J].International Journal of Pharmaceutics,2020,586:119594.
[18] RUGGI D,LUPO M,SOFIA D,et al.Flow properties of polymeric powders for selective laser sintering [J].Powder Technology,2020,370:288-297.
[19] LE-BAIL A,MANIGLIA B C,LE-BAIL P.Recent advances and future perspective in additive manufacturing of foods based on 3D printing [J].Current Opinion in Food Science,2020,35:54-64.
[20] HOLLAND S,TUCK C,FOSTER T.Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting [J].Carbohydrate Polymers,2018,200:229-238.
[21] 夏国峰,欧升阳,周忠元,等.基于马铃薯淀粉和马铃薯泥的食品 3D打印技术研究与发展 [J].食品与机械,2024,40(8):181-189.XIA G F,OU S Y,ZHOU Z Y,et al.Research and development of food 3D printing based on potato starch and potato puree [J].Food & Machinery,2024,40(8):181-189.
[22] RANDO P,RAMAIOLI M.Food 3D printing:effect of heat transfer on print stability of chocolate [J].Journal of Food Engineering,2021,294:110415.
[23] 石松业,温纪平,耿浩,等.基于淀粉原料的 3D打印技术及其应用 [J].食品与发酵工业,2024,50(12):353-361.SHI S Y,WEN J P,GENG H,et al.Application of 3D printing technology in foods based on starch [J].Food and Fermentation Industries,2024,50(12):353-361.
[24] 冯思敏,王晶,谢晨曦,等.铁皮石斛复合凝胶 CFD数值模拟与个性化 3D打印性能预测 [J].中国食品学报,2024,24(6):165-176.FENG S M,WANG J,XIE C X,et al.Prediction of CFD numerical simulation and personalized 3D printing performance of Dendrobium officinale composite gel [J].Journal of Chinese Institute of Food Science and Technology,2024,24(6):165-176.
[25] ZHOU W,WU Z G,XIE F W,et al.3D printed nanocellulose-based label for fruit freshness keeping and visual monitoring[J].Carbohydrate Polymers,2021,273:118545.
[26] LIU Y W,LIANG X,SAEED A,et al.Properties of 3D printed dough and optimization of printing parameters [J].Innovative Food Science & Emerging Technologies,2019,54:9-18.[27] AZAM R S M,ZHANG M,BHANDARI B,et al.Effect of different gums on features of 3D printed object based on vitamin-D enriched orange concentrate [J].Food Biophysics,2018,13(3):250-262.
[28] ZHU Y L,LIU Z B,ZHANG X F,et al.Microwave-triggered 4D automatic color change in 3D-printed food materials incorporating natural pigments [J].Foods,2023,12(10):2 055.
[29] HE C,ZHANG M,DEVAHASTIN S.Investigation on spontaneous shape change of 4D printed starch-based purees from purple sweet potatoes as induced by microwave dehydration [J].ACS Applied Materials & Interfaces,2020,12(34):37 896-37 905.
[30] WILSON A,ANUKIRUTHIKA T,MOSES J A,et al.Customized shapes for chicken meat –based products:feasibility study on 3D-printed nuggets [J].Food and Bioprocess Technology,2020,13(11):1 968-1 983.
[31] CHEN Y H,MCCLEMENTS D J,PENG X W,et al.Starch as edible ink in 3D printing for food applications:a review [J].Critical Reviews in Food Science and Nutrition,2024,64(2):456-471.
[32] PAN Y M,SUN Q X,LIU Y,et al.The relationship between rheological and textural properties of shrimp surimi adding starch and 3D printability based on principal component analysis [J].Food Science & Nutrition,2021,9(6):2 985-2 999.
[33] PAN Y,SUN Q,LIU Y,et al.Investigation on 3D printing of shrimp surimi adding three edible oils [J].Foods (Basel,Switzerland ),2024,13(3):429.
[34] CHENG-RONG T,YUNG-KAI L.Artificial steak:a 3D printable hydrogel composed of egg albumen,pea protein,gellan gum,sodium alginate and rice mill by-products [J].Future Foods,2022,5:100121.
[35] 刘毅飞.3D打印乳酸菌水凝胶制备及应用特性研究 [D].南京:南京农业大学,2022:77-78.LIU Y F.Study on preparation and application characteristics of 3D printed lactic acid bacteria hydrogel [D].Nanjing:Nanjing Agricultural University,2022:77-78.
[36] 王岩,牛犇,王冠楠,等.乳酸菌发酵诱导水蜜桃浆凝胶体系自发变色的 4D打印研究 [J].食品与发酵工业,2025,51(8):143-150.WANG Y,NIU B,WANG G N,et al.Spontaneous color change in peach pulp gel system for 4D printing induced by lactic acid bacteria fermentation study [J].Food and Fermentation Industries,2025,51(8):143-150.
[37] 黄齐林,温纪平.火龙果粉对全麦粉凝胶 3D打印特性的影响[J].粮食与油脂,2024,37(11):111-116.HUANG Q L,WEN J P.Effect of pitaya powder on 3D printing properties of whole wheat flour gel [J].Cereals & Oils,2024,37(11):111-116.
[38] 邱丽青.玫瑰残次花高值化加工及其在 3D/4D打印中的应用研究 [D].无锡:江南大学,2024:123-125.QIU L Q.Research on the value-added processing of defective |rose flowers and their applications in 3D/4D printing [D].Wuxi:Jiangnan University,2024:123-125.
[39] GUO C F,ZHANG M,DEVAHASTIN S.Color/aroma changes of 3D-Printed buckwheat dough with yellow flesh peach as triggered by microwave heating of gelatin-gum Arabic complex coacervates [J].Food Hydrocolloids,2021,112:106358.
[40] KIM S M,KIM H W,PARK H J.Preparation and characterization of surimi-based imitation crab meat using coaxial extrusion three-dimensional food printing [J].Innovative Food Science & Emerging Technologies,2021,71:102711.
[41] WANG T X,KAUR L,FURUHATA Y,et al.3D printing of textured soft hybrid meat analogues [J].Foods,2022,11(3):478.
[42] CHENG-RONG T,YUNG-KAI L.Artificial steak:a 3D printable hydrogel composed of egg albumen,pea protein,gellan gum,sodium alginate and rice mill by-products [J].Future Foods,2022,5:100121.
[43] BEN-ARYE T,SHANDALOV Y,BEN-SHAUL S,et al.Textured soy protein scaffolds enable the generation of three-dimensional bovine skeletal muscle tissue for cell-based meat[J].Nature Food,2020,1:210-220.
[44] 童强,姜宇,佟垚,等.食品 3D打印中的食品材料特性与应用研究进展 [J].食品与机械,2023,39(7):1-5,19.TONG Q,JIANG Y,TONG Y,et al.Research on the characteristics and application of food materials in food 3D printing [J].Food & Machinery,2023,39(7):1-5,19.
[45] ZHANG L,LOU Y M,SCHUTYSER M A I.3D printing of cereal-based food structures containing probiotics [J].Food Structure,2018,18:14-22.
[46] LIU Z B,BHANDARI B,ZHANG M.Incorporation of probiotics (Bifidobacterium animalis subsp.Lactis ) into 3D printed mashed potatoes:effects of variables on the viability[J].Food Research International,2020,128:108795.
[47] TRIPATHI M K,GIRI S K.Probiotic functional foods:survival of probiotics during processing and storage [J].Journal of Functional Foods,2014,9:225-241.
[48] CENTURION F,MERHEBI S,BAHARFAR M,et al.Cell-mediated biointerfacial phenolic assembly for probiotic nano encapsulation [J].Advanced Functional Materials,2022,32(26):2200775.
[49] ROSAS-VAL P,ADHAMI M,BROTONS-CANTO A,et al.3D printing of microencapsulated Lactobacillus rhamnosus for oral delivery [J].International Journal of Pharmaceutics,2023,641:123058.
[50] ASHOGBON A O.Dual modification of various starches:synthesis,properties and applications [J].Food Chemistry,2021,342:128325.
[51] WANG R Y,LI Z H,SHI J Y,et al.Color 3D printing of pulped yam utilizing a natural pH sensitive pigment [J].Additive Manufacturing,2021,46:102062.
[52] LIU Y T,TANG T T,DUAN S Q,et al.Applicability of rice doughs as promising food materials in extrusion-based 3D printing [J].Food and Bioprocess Technology,2020,13(3):548-563.
[53] MANIGLIA B C,LIMA D C,DA MATTA M J,et al.Dry heating treatment:a potential tool to improve the wheat starch properties for 3D food printing application [J].Food Research International,2020,137:109731.
[54] MANIGLIA B C,PATARO G,FERRARI G,et al.Pulsed electric fields (PEF) treatment to enhance starch 3D printing application:effect on structure,properties,and functionality of wheat and cassava starches [J].Innovative Food Science & Emerging Technologies,2021,68:102602.
[55] MA S,LIU J B,ZHANG Q R,et al.3D printing performance using radio frequency electromagnetic wave modified potato starch [J].Innovative Food Science & Emerging Technologies,2022,80:103064.
[56] 范颖,徐同成,宗爱珍,等.大豆多糖的化学改性及其应用研究进展 [J].粮食与油脂,2024,37(6):1-5.FAN Y,XU T C,ZONG A Z,et al.Research progress on chemical modification and application of soybean polysaccharides [J].Cereals & Oils,2024,37(6):1-5.
[57] QIU Z P,ZHENG B,XU J C,et al.3D-printing of oxidized starch-based hydrogels with superior hydration properties [J].Carbohydrate Polymers,2022,292:119686.
[58] MANIGLIA B C,LIMA D C,MATTA M D J,et al.Hydrogels based on ozonated cassava starch:effect of ozone processing and gelatinization conditions on enhancing 3D-printing applications [J].International Journal of Biological Macromolecules,2019,138:1 087-1 097.
[59] RAJA V,MOSES J A,ANANDHARAMAKRISHNAN C.Effect of 3D printing conditions and post-printing fermentation on pearl millet fortified idli [J].Journal of the Science of Food and Agriculture,2023,103(5):2 401-2 412.
[60] PARK H R,KANG J,RHO S J,et al.Structural and physicochemical properties of enzymatically modified rice starch as influenced by the degree of enzyme treatment [J].Journal of Carbohydrate Chemistry,2020,39(5/6):250-266.
[61] RONG L Y,SHEN M Y,WEN H L,et al.Effects of xanthan,guar and Mesona chinensis Benth gums on the pasting,rheological,texture properties and microstructure of pea starch gels[J].Food Hydrocolloids,2022,125:107391.
[62] CHEN Y Y,ZHANG M,SUN Y N,et al.Improving 3D/4D printing characteristics of natural food gels by novel additives:a review [J].Food Hydrocolloids,2022,123:107160.
[63] FENG C Y,ZHANG M,BHANDARI B.Materials properties of printable edible inks and printing parameters optimization during 3D printing:a review [J].Critical Reviews in Food Science and Nutrition,2019,59(19):3 074-3 081.