Abstract
［Objective］ To investigate the accurate positioning and error compensation model of pneumatic actuators in food sorting machinery,and to improve positioning accuracy and dynamic response.［Methods］ The effects of cylinder diameter,position sensor resolution,and friction force on positioning accuracy were analyzed.A correction method based on the Stribeck friction model was proposed,and the ARIMA model was employed to predict and compensate for pressure fluctuations.The control strategy was optimized by integrating a fuzzy PID self -tuning algorithm with a dual closed -loop control architecture.［Results］］ Validated through a digital twin platform,the maximum tracking error under sudden load changes was reduced from 0.38 mm to 0.05 mm,and the stabilization time was shortened to 0.48 s.In a continuous 24-hour experiment,the standard deviation of the positioning error remained within ±0.03 mm.During industrial validation,the positioning time was reduced from 120 ms to 85 ms,and the defect rate dropped to 0.15%.［Conclusion］ The proposed model significantly improves the positioning accuracy,dynamic response,and stability of food sorting machinery.
Publication Date
7-11-2025
First Page
86
Last Page
94
DOI
10.13652/j.spjx.1003.5788.2025.80459
Recommended Citation
Jianzu, WANG
(2025)
"Modeling of precise positioning and error compensation of pneumatic actuators in food sorting machinery,"
Food and Machinery: Vol. 41:
Iss.
7, Article 13.
DOI: 10.13652/j.spjx.1003.5788.2025.80459
Available at:
https://www.ifoodmm.cn/journal/vol41/iss7/13
References
[1] 崔嵬,袁瑞,孙立涛,等.基于机器视觉和改进 BOA的食品分拣机器人轨迹规划方法研究 [J].食品与机械,2024,40(10):80-85.CUI W,YUAN R,SUN L T,et al.Research on trajectory planning method for food sorting robot based on machine vision and improved BOA [J].Food & Machinery,2024,40(10):80-85.
[2] 侯义锋,钱俊,王梁,等.砂糖橘采摘机器人分拣机构设计 [J].中国农机化学报,2023,44(9):183-189.HOU Y F,QIAN J,WANG L,et al.Design of sorting mechanism of the clementine picking robots [J].Journal of Chinese Agricultural Mechanization,2023,44(9):183-189.
[3] 梁春苗,姚宁平,姚亚峰,等.煤矿用钻孔机器人钻臂定位误差补偿研究 [J].煤田地质与勘探,2024,52(3):153-163.LIANG C M,YAO N P,YAO Y F,et al.Positioning error compensation of drilling robot arm for coal mine [J].Coal Geology & Exploration,2024,52(3):153-163.
[4] 潘海鸿,喻洪基,陈旭红,等.用于超精密抛光机床的 Spline+GLS定位误差补偿模型 [J].组合机床与自动化加工技术,2023 (5):156-159,163.PAN H H,YU H J,CHEN X H,et al.Spline+GLS positioning error compensation model for ultra -precision polishing machine tool[J].Modular Machine Tool & Automatic Manufacturing Technique,2023 (5):156-159,163.
[5] 郭联金.多感知水果抓取及分拣控制系统的设计 [J].包装与食品机械,2022,40(6):89-94,99.GUO L J.Design of control system for multi-sensory fruit grabbing and sorting [J].Packaging and Food Machinery,2022,40(6):89-94,99.
[6] 王华.一种气动机器人垃圾分拣系统的设计与分析 [J].液压与气动,2022,46(9):86-91.WANG H.Design and analysis of a pneumatic robot garbage sorting system [J].Chinese Hydraulics & Pneumatics,2022,46(9):86-91.
[7] 王成军,韦志文,严晨.基于机器视觉技术的分拣机器人研究综述 [J].科学技术与工程,2022,22(3):893-902.WANG C J,WEI Z W,YAN C.Review on sorting robot based on machine vision technology [J].Science Technology and Engineering,2022,22(3):893-902.
[8] 齐智斌,郭联龙,兰帅航,等.基于改进 Stribeck 模型的伺服系统摩擦补偿研究 [J].微电机,2024,57(8):20-25,42.QI Z B,GUO L L,LAN S H,et al.Research on friction compensation of servo system based on modified Stribeck model [J].Micromotors,2024,57(8):20-25,42.
[9] 陈春俊,杨露,何智颖,等.ARIMA-BP 神经网络高速列车隧道压力波预测模型研究 [J].中国测试,2021,47(10):80-86.CHEN C J,YANG L,HE Z Y,et al.Research on tunnel pressure wave prediction model of high-speed train based on ARIMA-BP neural network [J].China Measurement & Test,2021,47(10):80-86.[10] 张淑娥,孟宪盖,韩中合.蒸汽湿度微波谐振腔热膨胀自补偿测量系统研究 [J].动力工程学报,2016,36(6):442-447.ZHANG S E,MENG X G,HAN Z H.Study on a thermal expansion self-compensation system for wetness measurement of moist steam based on microwave resonator [J].Journal of Chinese Society of Power Engineering,2016,36(6):442-447.
[11] 邓柯楠,高栋,马守东,等.基于迁移学习的铣削机器人定位误差补偿方法 [J].机械工程学报,2022,58(14):170-180.DENG K N,GAO D,MA S D,et al.An efficient error compensation method for milling robot based on transfer learning [J].Journal of Mechanical Engineering,2022,58(14):170-180.
[12] 张浩楠,康宁波,何建国,等.基于理想气体状态方程和道尔顿分压定律的气调包装气体混配系统 [J].食品与机械,2022,38(2):97-103.ZHANG H N,KANG N B,HE J G,et al.Gas mixing system of modified atmosphere packaging based onideal gas law and Dalton's law of partial pressure [J].Food & Machinery,2022,38(2):97-103.
[13] 曾凌霄,刘子豪,严志鹏,等.多通道次品虾自动剔除系统构建 及 关 键 控 制 参 数 优 化 [J].食 品 与 机 械,2022,38(11):105-110.ZENG L X,LIU Z H,YAN Z P,et al.Detection of defective shrimp and optimization for key parameters in multi-channel automatic elimination system [J].Food & Machinery,2022,38(11):105-110.
[14] 王子啸,王旺平,宋少云.基于 ADAMS 的胶辊砻谷机脱壳效率影响参数仿真分析 [J].食品与机械,2023,39(12):83-87.WANG Z X,WANG W P,SONG S Y.Simulation analysis of the influencing parameters on the shelling efficiency of rubber roller husker based on ADAMS [J].Food & Machinery,2023,39(12):83-87.
[15] 曹现刚,费佳浩,王鹏,等.基于多机械臂协同的煤矸分拣方法研究 [J].煤炭科学技术,2019,47(4):7-12.CAO X G,FEI J H,WANG P,et al.Study on coal-gangue sorting method based on multi-manipulator collaboration [J].Coal Science and Technology,2019,47(4):7-12.
[16] 林雪,黄鹏程,田立权,等.多功能一体包馅机的设计及其参数优化 [J].食品与机械,2021,37(3):116-119,161.LIN X,HUANG P C,TIAN L Q,et al.Design and parameters optimization of multifunctional encrusting machine [J].Food & Machinery,2021,37(3):116-119,161.