Abstract
[Objective] To address the common problems existing in current Camellia oleifera fruit shelling equipment, such as easy damage to seeds, poor integrity of shells, and unsatisfactory processing effect of fresh fruits. [Methods] A disc grading and rubbing type Camellia oleifera fruit production line is designed by integrating a feeding machine, a disc grader and three rubbing shelling machines. Taking the feeding speed, classification accuracy rate and classification radius error as indicators, the discrete element simulation analysis is conducted on the feeding machine and the disc grader. With the shell-breaking rate and seed-breaking rate as indicators, a joint simulation of the rubbing shelling machine is conducted using discrete element and RecurDyn software. The simulation results are compared and analyzed with the prototype test results. [Results] When the conveyor belt speed of the feeding machine is less than 0.14 m/s, the feeding amount of the disc grader is less than 40 s-1, the rubbing gap of the rubbing shelling machine is less than 3 mm, and the rubbing speed is 35 rad/min, the comprehensive shell-breaking efficiency is the best, with an average shell-breaking rate >97 % and seed-breaking rate <3 %. [Conclusion] The Camellia oleifera fruit production line machine has a high shelling rate and a low damage rate.
Publication Date
5-15-2026
First Page
111
Last Page
120
DOI
10.13652/j.spjx.1003.5788.2025.80337
Recommended Citation
Mingyong, LIU; Zixuan, JIN; Quanshuai, ZHAN; Zihao, CHEN; and Yanqing, WANG
(2026)
"Design and experiment of Camellia oleifera fruit grading and shelling processing line,"
Food and Machinery: Vol. 42:
Iss.
4, Article 14.
DOI: 10.13652/j.spjx.1003.5788.2025.80337
Available at:
https://www.ifoodmm.cn/journal/vol42/iss4/14
References
[1] 方学智,杜孟浩.我国油茶加工的现状及发展建议 [J].中国农村科技,2022 (11):51-53.FANG X Z,DU M H.Current situation and development suggestions of Camellia oleifera processing in China [J].China Rural Science & Technology,2022 (11):51-53.
[2] 原姣姣,王成章,陈虹霞,等.不同品种油茶籽的含油率和脂肪酸组成分析研究 [J].中国油脂,2012,37(1):75-79.YUAN J J,WANG C Z,CHEN H X,et al.Oil content and fatty acid composition analysis of different varieties of Camellia oleifera seeds [J].China Oils and Fats,2012,37(1):75-79.
[3] 王彦花,张云,王容,等.基于主成分分析的茶油品质综合评价研究 [J].中南林业科技大学学报,2019,39(6):45-51.WANG Y H,ZHANG Y,WANG R,et al.Research on comprehensive evaluation of Camellia oil quality based on principal component analysis [J].Journal of Central South University of Forestry & Technology,2019,39(6):45-51.
[4] 江泽鹏,蔡娅,张幸,等.油茶产量与果实主要经济性状相关性分析 [J].中国农学通报,2023,39(25):16-20.JIANG Z P,CAI Y,ZHANG X,et al.Correlation analysis of Camellia oleifera yield and main fruit economic character [J].Chinese Agricultural Science Bulletin,2023,39(25):16-20.
[5] 伍冠一,唐宗湘.止痒中药手绘图谱 [M].南京:东南大学出版社,2021:274.WU G Y,TANG Z X.Illustrated handbook of anti-itch Chinese medicines [M].Nanjing:Southeast University Press,2021:274.
[6] “中国地理百科 ”丛书编委会编著.罗霄山脉 [M].北京 /西安:世界图书出版公司,2017:105."China Geography Encyclopedia" Editorial Committee.Luoxiao mountains [M].Beijing/Xi'an:World Publishing Corporation,2017:105.
[7] 黄登昇,饶洪辉.我国油茶果机械化采摘设备研究现状及思考[J].林业机械与木工设备,2019,47(7):11-13.HUANG D S,RAO H H.Research status and consideration on mechanized picking equipment of camellia fruit in China [J].Forestry Machinery & Woodworking Equipment,2019,47(7):11-13.
[8] 宋 兴 国.一 种 油 茶 鲜 果 预 处 理 加 工 系 统:CN201922452842.1[P].2019 -12-31.SONG X G.A preprocessing system for fresh Camellia oleifera fruits:CN201922452842.1[P].2019 -12-31.
[9] 肖本贵,胡淑芬,邓勇杰,等.油茶果划线破壳装置设计 [J].南方农机,2021,52(16):17-19.XIAO B G,HU S F,DENG Y J,et al.Design of marking and breaking shell device for Camellia oleifera fruit [J].China Southern Agricultural Machinery,2021,52(16):17-19.
[10] 肖本贵,赖曲芳,胡淑芬,等.基于锥形针的油茶果破壳性能试验[J].湖南农业大学学报 (自然科学版),2021,47(6):720-726.XIAO B G,LAI Q F,HU S F,et al.Experimental of expanding shell breaking property of Camellia oleifera fruits [J].Journal of Hunan Agricultural University (Natural Sciences),2021,47(6):720-726.
[11] 王焱清,马君,熊韧.多通道气动刨削式油茶果破壳机设计[J].湖北农业科学,2018,57(12):100-105.WANG Y Q,MA J,XIONG R.Design on multi-channel pneumatic planer for Camellia oleifera shelling [J].Hubei Agricultural Sciences,2018,57(12):100-105.
[12] 陈礼东,胡淑珍,姚占斌,等.切割式油茶果脱蒲机设计与试验[J].农业工程,2021,11(5):80-85.CHEN L D,HU S Z,YAO Z B,et al.Design and experiment of cutting type Camellia oleifera fruit shelling machine [J].Agricultural Engineering,2021,11(5):80-85.
[13] 汤晶宇,王东,寇欣,等.四通道全自动油茶成熟鲜果脱壳机设计与试验 [J].农业机械学报,2021,52(4):109-116,229.TANG J Y,WANG D,KOU X,et al.Design and experiment of four-channel fully automatic shelling machine for ripe fresh Camellia oleifera fruit [J].Transactions of the Chinese Society for Agricultural Machinery,2021,52(4):109-116,229.
[14] 唐湘,谢方平,李旭,等.油茶果脱壳装置设计及试验 [J].湖南农业大学学报 (自然科学版),2014,40(6):665-668.TANG X,XIE F P,LI X,et al.Design and test of dehullingmachine for Camellia oleifera fruit [J].Journal of Hunan Agricultural University (Natural Sciences),2014,40(6):665-668.
[15] 仲 恺 农 业 工 程 学 院.一 种 油 茶 果 的 壳、籽 分 离 装 置 及 其 方法:201911222903.3[P].2020 -02-25.Zhongkai University of Agriculture and Engineering.A shell and seed separation device and method for Camellia oleifera fruits:201911222903.3[P].2020 -02-25.
[16] 祝兆帅,张佳喜,杨莉玲,等.斜齿对辊挤压式杏核破壳装置设 计 及 压 辊 强 度 分 析 [J].食 品 与 机 械,2021,37(5):115-119,202.ZHU Z S,ZHANG J X,YANG L L,et al.Design of apricot core-breaking device with squeeze-tooth-to-roller and analysis of the strength of pressing roller [J].Food & Machinery,2021,37(5):115-119,202.
[17] 杨柳君.一种油茶果脱壳机:CN210726628 U[P].2020 -06-12.YANG L J.Camellia oleifera fruit huller:CN210726628 U[P].2020 -06-12.
[18] 张风,杨志斌,张劲夫.油茶鲜果剥壳机机械设计原理 [J].湖北林业科技,2013 (3):21-23.ZHANG F,YANG Z B,ZHANG J F.Mechanical design principles of Camellia oleifera fresh fruit hulling machine [J].Hubei Forestry Science and Technology,2013 (3):21-23.
[19] 李 文 林,彭 宣 炎,杨 博,等.油 茶 果 脱 壳 技 术 与 设 备 研 究 [J].中国油脂,2018,43(4):151-153,156.LI W L,PENG X Y,YANG B,et al.Dehulling technology and device for oil-tea camellia fruit [J].China Oils and Fats,2018,43(4):151-153,156.
[20] 熊 平 原,王 毅,吴 卓 葵,等.油 茶 青 果 脱 壳 装 置 研 究 与 设 计[J].中国农机化学报,2016,37(5):126-129.XIONG P Y,WANG Y,WU Z K,et al.Research and design on shelling machine of green camellia fruit [J].Journal of Chinese Agricultural Mechanization,2016,37(5):126-129.
[21] 孙小永,李滨,潘荣晴,等.油茶果脱壳分选一体机设计研究[J].科技创新与生产力,2021 (7):102-104.SUN X Y,LI B,PAN R Q,et al.Design and research on the integrated machine of Camellia oleifera fruit shelling and sorting [J].Sci-Tech Innovation and Productivity,2021 (7):102-104.
[22] WORN J J,MITCHELL J.Nut-cracking apparatus:US2021401026 [P].2021 -12-30.
[23] FAKAYODE O A,AKPAN J F.Development,testing and optimization of a moringa (Moringa oleifera) seed dehuller [J].Agricultural Research,2020,9(2):249-261.
[24] IBIKUNLE R A,IKUBANNI P P,AGBOOLA O O,et al.Development and performance evaluation of palm nut cracker[J].Leonardo Electronic Journal of Practices and Technologies,2018 (33):219-234.
[25] AVIARA N,IYILADE I J,OYENIYI S K,et al.Performance evaluation of a bush mango (Irvingia gabonensis) nut cracking machine [J].Agricultural Engineering International:the CIGR Journal,2011,21(1):156-162.
[26] BERNIK R,STAJNKO D,DEMŠAR I.Comparison of the kernel quality of different walnuts (Juglans regia L.) varieties shelled with modified centrifugal sheller [J].Erwerbs-Obstbau,2020,62(2):213-220.
[27] DIXIT J,RAVINDRA K.Design,development and evaluation of walnut cracking machine [J].Agricultural Engineering International:CIGR Journal,2022,24(4):143-152.
[28] ZHANG H,LIU H L,ZENG Y,et al.Design and performance evaluation of a multi-point extrusion walnut cracking device[J].Agriculture,2022,12(9):1 494.
[29] 张禹鑫.差速对搓式油茶果脱壳机脱壳受力分析与参数优化[D].哈尔滨:哈尔滨理工大学,2022:16-18.ZHANG Y X.Stress analysis and parameter optimization of different-speed-pair-rubbing Camellia oleifera fruit sheller [D].Harbin:Harbin University of Science and Technology,2022:16-18.
[30] 李伟光,张占宽.微坑型微织构硬质合金表面对木材摩擦特性的影响 [J].林业科学,2019,55(4):136-143.LI W G,ZHANG Z K.The effect of micro-pits texture on the coefficient of friction between wood and cemented carbide [J].Scientia Silvae Sinicae,2019,55(4):136-143.
