Study on a new type of equipment for yuba production

Authors

YUAN Fucai, School of Mechanical & Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China
SUN Hailiang, School of Mechanical & Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China

Abstract

In order to ensure Yuba production for high quality, efficiency and continuousness, by analyzing the current situation of domestic and international in Yuba production, and study the Yuba production equipment commonly used features, a new type of equipment for continuous Yuba production was designed. By using "Pro/E" software, designed the virtual design of 3D view model in equipment and its key components. Through the virtual assembly and interference inspection indicaed that the device was reasonable in structure, and had no interference phenomenon. Has certain practical value and theoretical significance of the study.

Publication Date

6-28-2015

First Page

119

Last Page

121,144

DOI

10.13652/j.issn.1003-5788.2015.03.028

Recommended Citation

Fucai, YUAN and Hailiang, SUN (2015) "Study on a new type of equipment for yuba production," Food and Machinery: Vol. 31: Iss. 3, Article 28.
DOI: 10.13652/j.issn.1003-5788.2015.03.028
Available at: https://www.ifoodmm.cn/journal/vol31/iss3/28

References

[1] 周显宏，余以刚.豆皮加工与利用研究进展［J］.粮食与食品工业，2010,17(2)：9～12.
[2] 韩智，石谷孝佑，李再贵. 不同豆浆浓度和浆液深度对腐竹生产的影响［J］. 农业工程学报，2005，21(11):179～181.
[3] 欧阳平一，刘炜松. 腐竹工业化加工工艺优化研究［J］. 食品与机械，2010,26(2):123～126.
[4] 李诗龙，刘协舫，张永林.SFZCX125型腐竹自动成形机的研制［J］.粮油加工，2006(12):72～74.
[5] 李诗龙，丁文平，张永林，等.腐竹的机械化生产关键技术研究［J］.农业工程学报，2009，23(10):224～228.
[6] 晁贻存，刘延美. 自动化悬浮式腐竹机: 中国, CN2316821［P］. 1999—05—05.
[7] 孙德胜，孙庆新，孙艳红. 自动腐竹加工机: 中国, CN1582727［P］. 2005—02—23.
[8] 罗绯，林亲录，陆玲，等.超声提取豆皮水溶性膳食纤维的工艺研究［J］.食品与机械，2008，24(6):44～45.
[9] 乔元劭.豆腐皮机械化生产线的设计［D］.杭州：浙江大学，2008.
[10] 侯传亮，李诗龙.SFZCX125型腐竹结膜成形机研制［J］.农业机械，2011(1):149～152.
[11] 刘梦飞，郑甲红，高警. 采摘机－核桃树系统的仿真与试验［J］.食品与机械，2014，30(1)：107～110.
[12] 朱文华，马登哲，张健希. 虚拟装配技术应用的研究［J］. 机械设计与研究，2014，20(6)：47～51.
[13] Liu G H, Yao Y X. Development of a new virtual environment system for assembly［J］. Key Engineering Materials, 2006, 316(5): 556～560.
[14] 夏平均，姚英学. 虚拟装配的研究综述与分析［J］. 哈尔滨工业大学学报，2008(5)：2～6.
[15] Laycock S D,Day A M.A survey of haptic rendering techniques［J］.Computer Graphics Forum,2007,26(1):50~65.