Abstract
Taking the vertical sand-roller rice milling machine as an example, this paper carries out the simulation calculation of the materials’ movements inside the whitening chamber based on the discrete element method via the analysis software EDEM. The study sets up the discrete model of the whitening chamber and the brown rice with corresponding parameters and performs the discrete element simulation on material flows inside the whitening chamber; for the convenience of the analysis, the data of the motion locus curve and the force on the brown rice during the whitening process are presented with charts. These simulation results would provide references for the study of the generating mechanism of broken rice.
Publication Date
4-28-2016
First Page
106
Last Page
108
DOI
10.13652/j.issn.1003-5788.2016.04.025
Recommended Citation
Xiaoxia, PANG and Jinglan, RUAN
(2016)
"Motion simulation on materials inside whitening chamber of sand-roller rice machine based on discrete element method,"
Food and Machinery: Vol. 32:
Iss.
4, Article 25.
DOI: 10.13652/j.issn.1003-5788.2016.04.025
Available at:
https://www.ifoodmm.cn/journal/vol32/iss4/25
References
[1] 孙旭清, 钱生波, 万希武. 砂辊碾米机碾白室内压力及其他主要技术参数与结构探讨[J]. 粮食与饲料工业, 2008(2): 6-10.
[2] 王泳嘉. 离散单元法——一种适用于节理岩石力学分析的数值方法[C]//中国岩石力学与工程学会. 第一届全国岩石力学数值计算及模型试验讨论会论文集. 北京: 高等教育出版社, 1986: 32-37.
[3] 李博, 刘凡一, 陈军, 等. 深松铲耕作阻力影响因素的离散元法仿真分析[J]. 农机化研究, 2015(3): 71-74.
[4] Rui Zhang, Els D N J. Calibration of discrete element parameters and the modeling of silo discharge and bucket filling[J]. Computers and Electronics in Agriculture, 2009, 65: 198-212.
[5] 于建群, 钱立彬, 于文静, 等. 开沟器工作阻力的离散元法仿真分析[J]. 农业机械学报, 2009(2): 53-57.
[6] 徐登峰, 成荣, 朱煜, 等. 基于离散元方法的粮食自动分级研究[J]. 江苏农业科学, 2015(4): 396-399.
[7] 李洪昌, 李耀明, 唐忠, 等. 风筛式清选装置振动筛上物料运动CFD-DEM数值模拟[J]. 农业机械学报, 2012(3): 79-84.
[8] 李立青, 蒋明镜, 吴晓峰. 椭圆形颗粒堆积体模拟颗粒材料力学性能的离散元数值方法[J]. 岩土力学, 2011(4): 713-718.
[9] 郭敬山. 组合玉米和组合超球颗粒模型的三维离散元法算法研究[D]. 长春: 吉林大学, 2010: 23-27.
[10] 胡国明, 郭胜, 陈金鑫, 等. 离散元素法在工业过程分析与产品设计中的应用初探[J]. 机电工程, 2010(4): 1-5.
[11] 邓志国, 杨胜男. 立式砂辊碾米机的安装使用及维护[J]. 粮食与饲料工业, 2013(2): 1-3.