Simulation research on the transfer and collection part of warehouse bottom surplus grain cleaning device

Authors

HE Yingzhen, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China
WANG Mingxu, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China;Henan Provincial Key Laboratory of Grain and Oil Storage Construction and Safety, Henan University of Technology, Zhengzhou, Henan 450001, ChinaFollow
WANG Wei, Central Reserve Grain Binzhou Direct Warehouse Co., Ltd., Binzhou, Shandong 256600, China
LI Shubo, Central Reserve Grain Binzhou Direct Warehouse Co., Ltd., Binzhou, Shandong 256600, China

Corresponding Author(s)

王明旭（1980—），男，河南工业大学副教授，博士。E-mail: wmx20032002@163.com

Abstract

Objective: To verify whether the structure design of the conveying part and the collecting part of the cleaning device designed for the surplus grain at the bottom of the cottage warehouse is reasonable, and to determine the key parameters of the device operation, so as to avoid the waste of procurement and manufacturing. Methods: Based on discrete element method, EDEM simulation software was used to simulate the operation effect of the transfer part and the collection part, and the drop rate was used as the evaluation parameter. Results: Through the observation and analysis of the simulation results, it was concluded that the optimal running speed of the corrugated flange belt should be controlled between 0.6 m/s and 0.8 m/s under the condition that the transmission and collection parts could meet the design requirements. Conclusion: The simulation study verifies that the structure of the transfer part and the collection part of the surplus grain cleaning device meets the design requirements, and can provide a reference for the design of the equipment for the transfer and collection of grain materials.

Publication Date

3-27-2024

First Page

91

Last Page

96,220

DOI

10.13652/j.spjx.1003.5788.2023.80459

Recommended Citation

Yingzhen, HE; Mingxu, WANG; Wei, WANG; and Shubo, LI (2024) "Simulation research on the transfer and collection part of warehouse bottom surplus grain cleaning device," Food and Machinery: Vol. 40: Iss. 2, Article 14.
DOI: 10.13652/j.spjx.1003.5788.2023.80459
Available at: https://www.ifoodmm.cn/journal/vol40/iss2/14

References

[1] 王华宁, 肖果, 蒋明镜. 深部隧道力学分析的离散元与理论解分区耦合方法初探[J]. 冰川冻土, 2016, 38（4）: 867-874. WANG H N, XIAO G, JIANG M J. Preliminary study on the coupling method of discrete element and theoretical solution for mechanical analysis of deep tunnel[J]. Journal of Glaciology and Geocryology, 2016, 38（4）: 867-874.
[2] LI K, STROEVEN P, STROEVEN M, et al. Estimating permeability of cement paste using pore characteristics obtained from DEM-based modelling[J]. Construction and Building Materials, 2016, 126: 740-746.
[3] ZHUANG Y Q, CHEN X M, LUO Z H, et al. CFD-DEM modeling of gas-solid flow and catalytic MTO reaction in a fluidized bed reactor[J]. Computers and Chemical Engineering, 2014, 60（10）:1-16.
[4] SAIDI M, TABRIZI H B, GRACE J R, et al. Hydrodynamic investigation of gas-solid flow in rectangular spout-fluid bed using CFD-DEM modeling[J]. Powder Technology, 2015, 284: 355-364.
[5] CHESHOMI A, SHESHDE E A. Determination of uniaxial compressive strength of microcrystalline limestone using single particles load test[J]. Journal of Petroleum Science and Engineering, 2013, 111: 121-126.
[6] MISHRA B K. A review of computer simulation of tumbling mills by the discrete element method Part I: Contact mechanics[J]. International Journal of Mineral Processing, 2003, 71（1/2/3/4）:73-93.
[7] RENZOA D, MAIO F P D. Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes[J]. Chemical Engineering Science, 2003, 59（3）: 525-541.
[8] MINDLIN R D, DERESIEWICZ H. Elastic spheres in contact under varying oblique forces[J]. J Appl Mech, 1953, 20（3）: 327-344.
[9] JEFFERSON G, HARITOS G K, MCMEEKING R M. The elastic response of a cohesive aggregate: A discrete element model with coupled particle interaction[J]. Journal of the Mechanics and Physics of Solids, 2002, 50（12）: 2 539-2 575.
[10] LIU X X, CHRISTOPHE L M, GRARD D, et al. Elasticity and strength of partially sintered ceramics[J]. Journal of the Mechanics and Physics of Solids, 2010, 58（6）: 829-842.
[11] CUNDALL P A, STRACK O D L. A discrete element model for granular assemblies[J]. Géotechnique, 1979, 29（1）: 47-65.
[12] KAZUYOSHI I, MASANOBU O. Rolling resistance at contacts in simulation of shear band development by DEM[J]. Journal of Engineering Mechanics, 1998, 124（3）: 285-292.
[13] KAZUYOSHI I, MASANOBU O. Micro-deformation mechanism of shear banding process based on modified distinct element method[J]. Powder Technology, 2000, 109（1）: 192-205.
[14] 王美美, 王万章, 杨立权, 等. 基于EDEM的玉米子粒建模方法的研究[J]. 河南农业大学学报, 2018, 52（1）: 80-84, 103. WANG M M, WANG W Z, YANG L Q, et al. Research on corn kernel modeling method based on EDEM[J]. Journal of Henan Agricultural University, 2018, 52（1）: 80-84, 103.
[15] 池优阳, 阮竞兰. 垂直圆盘管道刮板输送机EDEM仿真研究[J]. 河南工业大学学报（自然科学版）, 2017, 38（5）: 93-99. CHI Y Y, RUAN J L. Simulation research on EDEM of vertical disc pipe scraper conveyor[J]. Journal of Henan University of Technology （Natural Science Edition）, 2017, 38（5）: 93-99.
[16] 康少波, 宋少云. 基于EDEM的谷糙分离仿真初探[J]. 武汉轻工大学学报, 2017, 36（2）: 102-105, 113. KANG S B, SONG S Y. Simulation of grain and rough separation based on EDEM[J]. Journal of Wuhan University of Light Industry, 2017, 36（2）: 102-105, 113.
[17] ZHOU L, YU J Q, LIANG L S, et al. DEM parameter calibration of maize seeds and the effect of rolling friction[J]. Processes, 2021, 9（6）: 914.
[18] 王云霞, 梁志杰, 张东兴, 等. 基于离散元的玉米种子颗粒模型种间接触参数标定[J]. 农业工程学报, 2016, 32（22）: 36-42. WANG Y X, LIANG Z J, ZHANG D X, et al. Interspecific contact parameter calibration of maize seed particle model based on discrete elements[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32（22）: 36-42.
[19] 金秀南, 张军昌, 薛晶峰, 等. 玉米种子与橡胶带离散元接触参数标定[J]. 农机化研究, 2022, 44（7）: 39-43. JIN X N, ZHANG J C, XUE J F, et al. Contact parameter calibration of discrete elements between corn seed and rubber belt[J]. Journal of Agricultural Mechanization Research, 2022, 44（7）: 39-43.
[20] 崔涛, 刘佳, 杨丽, 等. 基于高速摄像的玉米种子滚动摩擦特性试验与仿真[J]. 农业工程学报, 2013, 29（15）: 34-41. CUI T, LIU J, YANG L, et al. Experiment and simulation of rolling friction characteristics of corn seeds based on high-speed photography[J]. Transactions of the Chinese Society of Agricultural Engineering, 2013, 29（15）: 34-41.
[21] FEI D, WU Y Z, ZHENG S H, et al. Experiment on Poisson's ratio determination about corn kernel[J]. Advanced Materials Research, 2013, 2 606（781/782/783/784）: 799-802.
[22] CO瘙塁KUN M B, YALIN I, ZARSLAN C. Physical properties of sweet corn seed （Zea mays saccharata Sturt.）[J]. Journal of Food Engineering, 2005, 74（4）: 523-528.
[23] 史嵩, 张东兴, 杨丽, 等. 基于EDEM软件的气压组合孔式排种器充种性能模拟与验证[J]. 农业工程学报, 2015, 31（3）: 62-69. SHI S, ZHANG D X, YANG L, et al. Simulation and verification of filling performance of pneumatic combination hole seed dispenser based on EDEM software[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31（3）: 62-69.
[24] WANG L J, LI R, WU B X, et al. Determination of the coefficient of rolling friction of an irregularly shaped maize particle group using physical experiment and simulations[J]. Particuology, 2018, 38: 185-195.
[25] 贾振超, 张宗超, 李寒松, 等. 基于EDEM的齿爪粉碎机玉米粉碎仿真分析[J]. 饲料工业, 2020, 41（7）: 31-37. JIA Z C, ZHANG Z C, LI H S, et al. Simulation analysis of corn crushing with tooth and claw mill based on EDEM[J]. Feed Industry, 2020, 41（7）: 31-37.